|
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
20-02-2024, 09:31 AM | #1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Perth
Posts: 7,226
|
So while my daughter was away learning how to fight fires as part of her Rangers job, some low life tried to steal her 07 Suzuki Swift.
Smashed all the plastic around the ignition, pulled out a plug or something as well. The ignition barrel is still in place, but the key won't go in because it's had a screw driver jammed in I'm guessing to try and start it. I'm going to get a replacement barrel from a wrecker, sorry, dismantler. Question 1 is, will the car recognise the new ignition barrel and 2, will I have to somehow reprogram the key fob so the lock/unlock buttons will work. I'm guessing that ring that's been pulled away from the barrel is the key reader for the immobiliser?
__________________
jaydee351 4DV8 |
||
20-02-2024, 09:36 AM | #2 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,447
|
Have you checked price and lead time for a VIN-matched ignition barrel from Suzuki? Or a “locksmith to configure” set?
Else you’ll probably need a copy made of the “new” key, and have the copy fitted with a chip cloned from the old key. |
||
20-02-2024, 09:50 AM | #3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Perth
Posts: 7,226
|
Howd I know you'd be first to reply CB.
No and no. Unfortunately she lives up north in Karratha, so I'll have to organise stuff down here. There maybe a locksmith in town. One guy selling a key and barrel on eBay, and he's also selling the ECM with it. Hadn't thought of that. Apparently there is a locksmith in town, I've sent her the link. First port of call to see what we're dealing with.
__________________
jaydee351 4DV8 Last edited by jaydee; 20-02-2024 at 10:12 AM. |
||
20-02-2024, 10:11 AM | #4 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,447
|
By 07 it may be a mess to start swapping modules. You’re better off bullying the replacement parts to work with what is already fitted.
It could even be that your locksmith can re-key the replacement barrel to match your original key, as he has a suitable key to assist in dismantling it. |
||
This user likes this post: |
20-02-2024, 10:17 AM | #5 | ||
praek tih kl jo kr
Join Date: Mar 2011
Location: Atwell W.A.
Posts: 1,687
|
All you need to do is pull the chip from her original key and fit it to the new key, or hang the old key from the same keyring close to the reader as its the chip its looking for not the actual key.
|
||
20-02-2024, 02:01 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Perth
Posts: 7,226
|
Thanks guys, good to now joker.
Have found a guy in town who knows how to sort it hopefully. Apparently same thing happened to a Golf down the road and he fixed that.
__________________
jaydee351 4DV8 |
||