|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-04-2014, 01:01 AM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2010
Posts: 7
|
Hi guys, I got a 1600 i have removed from my cortina, I am going to be rebuilding it myself as it is a simple engine and i can learn on it. When i removed the engine i could turn it over by hand so it wasnt a seized engine. The head has detonation marks on it, and the bore in the block measures up as standard size for that engine and there is no scoring down any of them, all nice and smooth, all the pistons have FoMoCo stamped on them, they are well and truly shagged along with the rings. I am thinking that possibly it has never been stripped down for a rebuild? If thats the case, can it be rebuilt without the block being decked, bored and honed? just the head reconned, pistons and all new bottom end bits and gaskets etc...? Its not going into a car thats going to be flogged endlessly, just a weekender.
Thoughts anyone? Thanks |
||
|
|
|
25-04-2014, 08:58 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2013
Location: Brrisbane QLD
Posts: 1,184
|
You're on the right track, however i would still have the bores lightly honed so the new rings can bed in properly.
|
||
|
|
|
|
25-04-2014, 08:58 AM
|
#3 | ||
|
Regular Member
Join Date: May 2010
Location: Sunny Coast
Posts: 53
|
It would pay to have the bores honed
__________________
1965 Lotus Cortina 1963 GT Cortina 1962 Cortina Deluxe 1962 Cortina Deluxe |
||
|
|
|
|
25-04-2014, 10:44 AM
|
#4 | ||
|
Regular Member
Join Date: Oct 2006
Location: Canberra region
Posts: 353
|
I think I may have a new set of standard size pistons/rings for a 1600. I can double check if you're interested. They are cast pistons like standard.
Cheers Jamie |
||
|
|
|
|
26-04-2014, 01:38 AM
|
#5 | ||
|
Starter Motor
Join Date: Dec 2010
Posts: 7
|
cheers, pm me if you got any?
|
||
|
|
|
1600 x-flow
Linear Mode
