|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
08-12-2010, 02:06 PM | #1 | ||
Starter Motor
Join Date: Dec 2009
Posts: 1
|
Hey
I have a 1980 MK2 Escort with the 1.6 kent motor, I would like to keep the original motor and do a few upgrades. I havent even look at which carbie is fitted stock mabye someone can tell me ?. But I do have a cortina gt manifold with the weber DFM carb and I wanted to confirm this would fit the esky as I believe they both had 1600 kent engines and also would it have a significant enough performance increase to warrant changing over from stock. Thanks for any help |
||
09-12-2010, 06:27 AM | #2 | ||
Rally Nut
Join Date: Feb 2009
Location: Melbourne
Posts: 297
|
your car will already have a dual throat weber carbie on it (complete with pollution gear)
the GT manifold & DFM carbie will fit, performance gain is very hard to judge as you will also be removing the polution gear which will change the performance but it is not a good thing if you get caught.... |
||
10-12-2010, 11:29 AM | #3 | ||
Regular Member
Join Date: Nov 2010
Location: Peakhurst
Posts: 82
|
Changing a carbie just by itself shouldn't give you any increased performance unless there is a problem with the original carb. To get some gain you need to change the engine's ability to burn more air/fuel. Extractors, head mods or hotter cams are traditional ways to increase the flow in the combustion chamber and combined with a bigger carb should give performance gains.
Pete 70V6 |
||