Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 02-10-2015, 08:54 PM   #1
seagoon
Starter Motor
 
Join Date: Oct 2015
Posts: 2
Default MC ground clearance.

These is some great reading in this forum, thanks all!

I've been looking for a medium car, preferably diesel, to replace our seemingly indestructable but very tired Magna sedan. Today I drove a 2013 Zetec TDCi wagon and it certainly met the expectations I had from reading reviews. Great to drive!

I'd be completely sold on it, but the ground clearance has me stunned. Only 112mm. The Magna is 165mm!

We have occasionally gone on some fairly rough dirt roads (almost tracks a couple of times) on the way less travelled, and in the Magna it has never been an issue. The sump still has all its paint.

In the MC I'm pretty sure this wouln't be the case. And there is exhaust gas sensor (?) wiring half way down the pipe that is hardly protected as well.

Can anybody relate their experiences on a bit of rough road? What happens when you bottom out in a dip, apart from putting a hole in that thin plastic body fairing that is under the sump?

Guess I'd have to remember those much lower profile tyres too!

Has anybody heard of the outcome of putting some of these in:
http://www.spaccer.com/en_NZ/makes-a...ondeo-iii.html


Cheers,
seagoon is offline   Reply With Quote Multi-Quote with this Post
Old 03-10-2015, 11:15 PM   #2
NZ XR6
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,266
Default

I have a MB diesel as a work vehicle and regularly drive it in a quarry. It does really well, but I do have to watch the ground clearance at the front. A couple of times I've had to reverse to get around the lack of clearance! The traction control and ABS work well.

The undertray isn't plastic, it's quite a tough fibrous material. It has a few scrapes on it now, but has kept its shape well.

TBH, you'd be better off with something like an Outback if you regularly drive on rough roads. But I think you'd be surprised at how the Mondeo would cope.
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels.
NZ XR6 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 04-10-2015, 08:51 AM   #3
Binny
Regular Member
 
Join Date: Apr 2014
Posts: 309
Default Re: MC ground clearance.

Welcome to our forum.
Yes it's pretty low but probably not as bad as you think.

I've never had trouble with steep driveways or anything. I did bottom the centre section out once at a highway rest area. There was a very abrupt lip to get over when you drove back onto the highway and I caught the edge of a heat shield under the back seat and bent it down. We were fully loaded up with the family and luggage for a 2 week holiday though.

If you are going to drive on rough dirt roads though perhaps its not the best choice. In addition to road clearance, being a euro car they also have firm suspension and low profile tyres. Even my povvo pack LX has 55 series tyres. I love the Mondeos flat handling and taught ride but a corrugated dirt road can be very rough. Our AU wagon was better for that sort of thing. For everything else (ie how we drive every day) I prefer the Mondeo.
__________________
2016 Kuga Trend TDCi
Binny is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 08-10-2015, 08:11 AM   #4
Deo
Regular Member
 
Deo's Avatar
 
Join Date: Jul 2014
Posts: 148
Default

Given how /enormous/ the wheel wells are, you can fit larger tyres and crib a little bit of ride height & compliance. I did this and got a 19mm increase.


Sent from my GTi-9305 using bloody Tapatalk
__________________
_ __ __ __ __ __ __ __ _
_____________________
2010.11 Mondeo Titanium
MC Ink Blue Diesel Hatch

Last edited by Deo; 08-10-2015 at 08:26 AM.
Deo is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL