|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-03-2007, 01:33 PM
|
#1 | ||
|
Tuned by HPF
Join Date: Jan 2007
Location: Cranbourne
Posts: 415
|
Hi All, and before you say it, this is not another thread asking "How do I remove the crank pulley".
I am looking at installing a supercharger (USA Kit) but I am stuck with how to run the additional crank pulley. It looks like my crank pulley and crank position thingy is one complete unit? How do I remove the single crank pully and bolt in a double one (One for Acc. and one for supercharger). Like this one: http://store.summitracing.com/largei...fa018021_w.jpg Any assistance would be appreciated. Regards Norton |
||
|
|
|
16-03-2007, 09:12 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
with a lot of difficulty...have you ever removed the crank pulley on a falcon before? it only has one bolt, right in the middle to hold it onto the crank. i'm sure you could get something link that made up, but i think you'd be better off mounting the s/c so it lines up with the standard one, and get a longer drive belt
|
||
|
|
|
|
16-03-2007, 09:42 PM
|
#3 | ||
|
Are you sure about that?
Join Date: Feb 2006
Location: Up here, out there
Posts: 167
|
Easy as!
Since you have a V8 the old pulley un-bolts (4 bolts hold it on 9/16 or 5/8 Sorry been a while) from the harmonic balancer. Then you just bolt up the new pulley! |
||
|
|
|
|
16-03-2007, 11:28 PM
|
#4 | |||
|
Tuned by HPF
Join Date: Jan 2007
Location: Cranbourne
Posts: 415
|
Quote:
There is no way to seperate the pulley from the rest, so instead of paying for a new pulley ($100 to $150) I have to buy the CAPA pulley for $400 as it has been designed to fit on the existing AU pulley. |
|||
|
|
|
|
16-03-2007, 11:37 PM
|
#5 | ||
|
Are you sure about that?
Join Date: Feb 2006
Location: Up here, out there
Posts: 167
|
BUGGER!
 :Sorry my stuff up! And as for the the price OUCH! |
||
|
|
|
Crank Pulley Help
:
Linear Mode
