Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 17-08-2006, 08:19 AM   #1
ENEMY
Starter Motor
 
ENEMY's Avatar
 
Join Date: Aug 2006
Posts: 6
Default About to convert to a Blue Oval.....

G'day gentlemen, how's things?


Well the faithful old VS SS ute is on it's last legs, so it's time for another work ute for me.

I've found 2002 AU XR8 250 Pursuit Ute. Looks and drives like a beast.... i love it. But i'tackling all of the issues before forking out the cash.

I've been reading the site, and i'm a tad worried as to the reliability of the AU falcon.

I'm coming from a car that i serviced every 10,000 kays, didn't drive it too hard, and in 300,000 k's all i've needed to replace is a starter motor, altenator, and power steering pump (so $2000 repairs in 5 years).

What's the general consensus on the AU XR8's reliability wise?

I'm not going to have $5000 disposable cash if a repair comes about, as this is the 3rd vehicle that is just used to get me from site to site etc.


Your assistance would be greatly appreciated lads, as i dont want to make the wrong decision!

Cheers,

Grant

ENEMY is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 08:25 AM   #2
Falcon Freak
Banned
 
Falcon Freak's Avatar
 
Join Date: Mar 2005
Posts: 2,516
Default

Well to the light son. Hope your stay is long one.

FF
Falcon Freak is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 08:30 AM   #3
Rob
Living the dream
 
Join Date: Nov 2005
Location: NSW
Posts: 1,795
Default

I can only speak for the AU 6, but given that much of the componentry is similar, I'd say fears of unreliability are unfounded. I used to give my AU a good bollocking, nothing let go...

Theres a sticky thread here regarding the reliability of AU's, give it a go.

Good luck!
Rob is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 08:36 AM   #4
ENEMY
Starter Motor
 
ENEMY's Avatar
 
Join Date: Aug 2006
Posts: 6
Default

Quote:
Originally Posted by BLC
I can only speak for the AU 6, but given that much of the componentry is similar, I'd say fears of unreliability are unfounded. I used to give my AU a good bollocking, nothing let go...

Theres a sticky thread here regarding the reliability of AU's, give it a go.

Good luck!
Bugger, new i should have searched more.

I'll check it out

Cheers BLC
ENEMY is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 09:39 AM   #5
Falcon Freak
Banned
 
Falcon Freak's Avatar
 
Join Date: Mar 2005
Posts: 2,516
Default

Quote:
Originally Posted by Falcon Freak
Well to the light son. Hope your stay is long one.

FF
That should have said 'Welcome to the light.....

FF
Falcon Freak is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 09:48 AM   #6
GCFordChic
I love AU XR8s
 
GCFordChic's Avatar
 
Join Date: Apr 2006
Location: Gold Coast QLD
Posts: 1,382
Default

Pursuit 250, excellent choice, even if i am a little biased myself....hehehe

we only got the 250 in March(ish) but havent needed to spend a cent...even though we decided to, but that was all optional...(there is a link to it in my signature).

Ours was in top condition when we bought it, so i guess it totally depends on the individual car. I would be personally more comfortable knowing it is a handbuilt quality engine with tickford enhancements, so it sort of is in a class of its own from the AU.

Mind you, by the time Ford got to the AUIII it had sorted out most of the problems that you probably have heard about the AU series...

Ours is totally reliable, if only we had it more often that the body kit blokes/exhaust fellas/every other person we take for something extra to get added to it... lol
__________________
Quote:
They're all broken. Forget about it. That's stupid - Neil Crompton - Telstra Sydney 500, 2010

FPV & XR Owners Club of Qld
Want more info on our club?
fpvxrqldinfo@gmail.com
or see our Club Section

My Garage:
AU II XR8 Sedan "Lil T"
Hyundai i30 SR
yeah baby!
GCFordChic is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 09:52 AM   #7
Polyal
Virtuous Bogan (TM)
Donating Member2
 
Polyal's Avatar
 
Join Date: Jan 2005
Location: TAS
Posts: 27,527
Default

well in general the 5.0 is pretty bulletproof, more reliable that the I6 over time I would have thought. But like you obviously know, if somehting lets go its a bit dearer.

The AU in general is a very reliable car, on forums you only ever read about the bad stuff because we are all bitches deep down that love a winge...lol
__________________
  • 2023 Mitsubishi Triton
  • 2017 Mitsubishi Pajero Sport
  • 2003 CL7 Honda Accord Euro R (JDM) - K20A 6MT
  • 1999 Lexus IS200 - 1G-FE Turbo 6MT
  • 1973 ZF Ford Fairlane
Polyal is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 11:04 AM   #8
Polyal
Virtuous Bogan (TM)
Donating Member2
 
Polyal's Avatar
 
Join Date: Jan 2005
Location: TAS
Posts: 27,527
Default

Quote:
Originally Posted by Polyal
well in general the 5.0 is pretty bulletproof
Bit weird quoting myself, but I know its a 5.6 before someone points that out; tomato, tomatoe.
__________________
  • 2023 Mitsubishi Triton
  • 2017 Mitsubishi Pajero Sport
  • 2003 CL7 Honda Accord Euro R (JDM) - K20A 6MT
  • 1999 Lexus IS200 - 1G-FE Turbo 6MT
  • 1973 ZF Ford Fairlane
Polyal is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 11:58 AM   #9
JD86
DELANY
 
JD86's Avatar
 
Join Date: Jul 2005
Location: Melbourne
Posts: 1,733
Default

Welcome to the other side ENEMY.

Hope you enjoy this forum as much as all us blue oval fans.
__________________
2010 FG XR6T - 6 speed manual - luxury pack
JD86 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 02:20 PM   #10
Ghiadude
FORMERLY TX3DUDE
 
Ghiadude's Avatar
 
Join Date: Jan 2005
Location: "THE GONG"
Posts: 2,487
Default

:welcome.
I dont think you should have a problem with a pursuit.
__________________
Quote:
Originally Posted by AL NZ
it wouldn't matter what FPV or FordOz call it, because it will be - The One.
Ghiadude is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 06:54 PM   #11
Gaz
Got Ghia?
 
Gaz's Avatar
 
Join Date: Jul 2006
Location: Perth
Posts: 999
Default

using a pursuit 250 to just go between sites?

i wanna bash ya over the head :P

reasonably rare ute? only 500 or so made wasnt there?
Gaz is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 07:15 PM   #12
MoreHPformyXR6
FF.Com.Au Hardcore
 
MoreHPformyXR6's Avatar
 
Join Date: Jan 2006
Location: FoMoCo
Posts: 3,441
Default

Quote:
Originally Posted by Polyal
The AU in general is a very reliable car, on forums you only ever read about the bad stuff because we are all bitches deep down that love a winge...lol
That has some truth in it people will talk up a storm & shout from the roof top if there is a problem with there car. They will tell everyone & anyone who cares to listen. But there is many more owners that are very happy with there car. But in general they often want talk about quite as much if there happy with it or have no issues. If I had of read the thread on what problems you have had with your BA I "may not have bought it". What a great car I would have missed out on.
__________________
FGX XR6 Lightning Strike Sedan

BA XR6 Mk II Shockwave Sedan - Now Sold - gone but not forgotten

mods: 20% under drive, Pacemaker Comps 4495' (ceramic coated) , 3' Metal Cat, XR6T exhaust - twin 3' tips, F6 CAI, K&N panel filter, PWR trans cooler, customed tuned by Heinrich Performance Tuning HPT 183.7rwkw.


Quote:
Originally Posted by ATMO SIX
You have become the new SLOANY mate, no real quality to your current post(s).
MoreHPformyXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 07:36 PM   #13
ENEMY
Starter Motor
 
ENEMY's Avatar
 
Join Date: Aug 2006
Posts: 6
Default

Quote:
Originally Posted by Gaz
using a pursuit 250 to just go between sites?

i wanna bash ya over the head :P

reasonably rare ute? only 500 or so made wasnt there?
LOL, it sounds bad when you say it like that, i'll also use it as a tow car if that makes the purchase more justified :


Thanks for the welcome Lads.

Many meetups in QLD with other Pursuit owners?
ENEMY is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 07:54 PM   #14
8pAc
RDP #181
 
8pAc's Avatar
 
Join Date: Feb 2005
Posts: 438
Default

The 5.0's are very good, but you will probably break a valve spring in it eventually if it is a 200 or 220. I did one recently with the car only having done 68,000 km's but the do have 1.7 ratio rockers in the 220 which is what i have. Very good engine in a very good car.
__________________
Quote:
Originally Posted by MRJUCY
Camrys like most Toyotas have always been ugly, poorly equiped & brain crushingly dull but that's what a lot of people look for in a car unfortunately. I like my fridge, it keeps my beer cold other people like them so much they want to drive them it seems.
8pAc is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 08:00 PM   #15
ENEMY
Starter Motor
 
ENEMY's Avatar
 
Join Date: Aug 2006
Posts: 6
Default

Quote:
Originally Posted by 8pAc
The 5.0's are very good, but you will probably break a valve spring in it eventually if it is a 200 or 220. I did one recently with the car only having done 68,000 km's but the do have 1.7 ratio rockers in the 220 which is what i have. Very good engine in a very good car.
Ouch, what was the repair bill on that mate?
ENEMY is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 08:18 PM   #16
8pAc
RDP #181
 
8pAc's Avatar
 
Join Date: Feb 2005
Posts: 438
Default

It would have been cheap and quick but i had my heads swapped for some alloys and ran into some dramas. Cost would depend if you did all the springs or just the broken one. No other damage occured though to the piston/head valve etc very strange.
__________________
Quote:
Originally Posted by MRJUCY
Camrys like most Toyotas have always been ugly, poorly equiped & brain crushingly dull but that's what a lot of people look for in a car unfortunately. I like my fridge, it keeps my beer cold other people like them so much they want to drive them it seems.
8pAc is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 09:23 PM   #17
DJM83
Barra Turbo > V8
Donating Member3
 
DJM83's Avatar
 
Join Date: Jan 2005
Posts: 25,482
Default

Quote:
Originally Posted by 8pAc
The 5.0's are very good, but you will probably break a valve spring in it eventually if it is a 200 or 220. I did one recently with the car only having done 68,000 km's but the do have 1.7 ratio rockers in the 220 which is what i have. Very good engine in a very good car.
Pursuit 250= 250kw 5.6L stroker. Nice ute they are definately different and very sexy ute, although i wouldnt use it as a "site to site" ute but if you want to thats your choice. Hope you enjoy the site (Fordforums) and hopefully your new ute, Long live the AU
__________________
2011 XR6 Turbo Ute
- Manual
- Lux Pack
- Twin 2.5" Stainless Exhaust
- Antz Turboside Intake
- CCForged Phatlux wheels
- Tuned by LS Tuning and Performance
DJM83 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 09:34 PM   #18
8pAc
RDP #181
 
8pAc's Avatar
 
Join Date: Feb 2005
Posts: 438
Default

Quote:
Originally Posted by TE50 056
Pursuit 250= 250kw 5.6L stroker. Nice ute they are definately different and very sexy ute, although i wouldnt use it as a "site to site" ute but if you want to thats your choice. Hope you enjoy the site (Fordforums) and hopefully your new ute, Long live the AU

Whoops soz ignored the fact the first post said Pursiut lol Jsmilie: : my bad still Awesome car, awesome to the max... : :ymca:
__________________
Quote:
Originally Posted by MRJUCY
Camrys like most Toyotas have always been ugly, poorly equiped & brain crushingly dull but that's what a lot of people look for in a car unfortunately. I like my fridge, it keeps my beer cold other people like them so much they want to drive them it seems.
8pAc is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 11:32 PM   #19
GCFordChic
I love AU XR8s
 
GCFordChic's Avatar
 
Join Date: Apr 2006
Location: Gold Coast QLD
Posts: 1,382
Default

Quote:
Originally Posted by ENEMY
LOL, it sounds bad when you say it like that, i'll also use it as a tow car if that makes the purchase more justified :


Thanks for the welcome Lads.

Many meetups in QLD with other Pursuit owners?
Just Pursuit 250 owners? well there is me and brett....

If you are on the GC you could join our car club and come to club events, lots of good cars, not necessarily pursuit's... (That is, once you have the ute)

where is it being sold from, ill go grab it so Brett and I can have matching ones!!!
__________________
Quote:
They're all broken. Forget about it. That's stupid - Neil Crompton - Telstra Sydney 500, 2010

FPV & XR Owners Club of Qld
Want more info on our club?
fpvxrqldinfo@gmail.com
or see our Club Section

My Garage:
AU II XR8 Sedan "Lil T"
Hyundai i30 SR
yeah baby!
GCFordChic is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2006, 11:50 PM   #20
GCFordChic
I love AU XR8s
 
GCFordChic's Avatar
 
Join Date: Apr 2006
Location: Gold Coast QLD
Posts: 1,382
Default

Werent there 250 made?

I also remember reading somewhere that the pursuit wasnt certified for towing...hmmm..ill try track down where i read that for you some time tomorrow...it may or may not be true/a reliable source....

Jennifer
__________________
Quote:
They're all broken. Forget about it. That's stupid - Neil Crompton - Telstra Sydney 500, 2010

FPV & XR Owners Club of Qld
Want more info on our club?
fpvxrqldinfo@gmail.com
or see our Club Section

My Garage:
AU II XR8 Sedan "Lil T"
Hyundai i30 SR
yeah baby!
GCFordChic is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2006, 03:49 PM   #21
ENEMY
Starter Motor
 
ENEMY's Avatar
 
Join Date: Aug 2006
Posts: 6
Default

Quote:
Originally Posted by GCFordChic
Werent there 250 made?

I also remember reading somewhere that the pursuit wasnt certified for towing...hmmm..ill try track down where i read that for you some time tomorrow...it may or may not be true/a reliable source....

Jennifer
I think you just need to upgrade the auto cooler...

If not... BUGGER
ENEMY is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2006, 06:11 PM   #22
GCFordChic
I love AU XR8s
 
GCFordChic's Avatar
 
Join Date: Apr 2006
Location: Gold Coast QLD
Posts: 1,382
Default

Well i couldnt remember where i found it, so i Googled it and found some interesting links for you to read the editorial/reviews on it from when it was first released...

this is the one that says it isnt certified for towing...
(2nd last paragraph)

Pursuit 250 review 1

Pursuit 250 review 2

I am not really too sure at all whether it can tow or not, because in my searching i found someone on another forum used the 250 to tow his show car around...so maybe you can..."It must be true, its on the internet!"... I would go look through the owners manual for you, but ours is in at the body kit shop at the moment...anyone else got an answer?
__________________
Quote:
They're all broken. Forget about it. That's stupid - Neil Crompton - Telstra Sydney 500, 2010

FPV & XR Owners Club of Qld
Want more info on our club?
fpvxrqldinfo@gmail.com
or see our Club Section

My Garage:
AU II XR8 Sedan "Lil T"
Hyundai i30 SR
yeah baby!
GCFordChic is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2006, 08:05 PM   #23
WRP11
NF Fairlane ghia
 
WRP11's Avatar
 
Join Date: Aug 2006
Location: Gold Coast - upper coomera
Posts: 57
Default

Welcome ENEMY... you seem to be on a learning curve, good stuff.. firstly, the holden to ford decision, the only way is up, and the "Gentlemen / lads" thing... hmmmmm :voldar02:
WRP11 is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2006, 08:14 PM   #24
turboute
turboute
 
Join Date: Jan 2005
Location: Perth WA
Posts: 502
Default

Hi mate, nice to see you crossing from the dark side into the light...

Have you considered a BA/F XR6T Ute? Aparently there have been taxi's that have clocked up 300'k's with those engines (part of Fords engine testing) with no major problems - also a bit newer and has a few more go-fast bits around if you do want more power.

The Pusuit 250 Is a great bit of kit though and I am sure that when tickford were hand building those engines they made sure they would last...
turboute is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL