|
|
|
|
|
05-10-2013, 02:28 AM
|
#1 | ||
|
meh.
 
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
Hey guys and girls,
I know I should be getting better economy then this surely. It's the exact same driveline as I had in my wagon and yet it feels down on power, and is using excessive amounts of fuel (on average of 20L per 100km's locally, and 16L per 100km's on the freeway)... My wagon use to get 12.5L's per 100km's at worst, and that was giving it a hiding every chance, running out every gear and skids most of the time too (on private roads)... It's got a new oxy sensor, new leads/plugs/coilpack, injectors, thermostat, fuel pump... The only thing I can think of is do a t/b clean, check the TPS voltages and clean the regulator (should be clean as though, as the fuel tank was removed within the first 10,000km's of its life)... Maybe replace the intake sensor too...? Cat isn't blocked 100%. And for those who don't know, 4L VCT 5 speed manual AU Fairlane Sportsman Any help appreciate...
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
05-10-2013, 03:50 AM
|
#2 | ||
|
Lacking Imagination
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
|
When you did the manual conversion,
Did you Chip the ECU?
__________________
My 11 Second AU Fairlane 364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W |
||
|
|
|
|
05-10-2013, 08:25 AM
|
#3 | ||
|
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
A ecu scan could be on the cards, my suggestion is knock sensor maybe?
cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
||
|
|
|
|
05-10-2013, 10:13 AM
|
#4 | ||
|
Regular Member
Join Date: Feb 2011
Location: Newcastle
Posts: 234
|
FYI ... I get 14 litres/100km average this year, on E10 primarily.
... having travelled 4374 kms, comprised of 2508/57% on city and suburban, and 1866/43% on freeway (110km/hr stuff, more or less) to give 14.06 litres/100km.
__________________
~~~~~~~~~
-- Ford Fairmont Ghia AU2, 3/2001, Tickford 4.0 I6, 12v SOHC VCT MPFI, sedan with IRS standard suspension -- ----- ANJ is a practical beast, but still a lady, that I want to keep alive until at least2021 ----- -------- Preventative Maintenance Policy -------- |
||
|
|
|
|
05-10-2013, 05:20 PM
|
#5 | ||
|
meh.
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
ECU scan was done a week ago, no issues showed up after 3 back to back scans...
Still auto ECU, but my wagon was the same for 6 months until I found a manual ECU.
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
|
05-10-2013, 05:39 PM
|
#6 | ||
|
Lacking Imagination
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
|
You Converted the Lane to Petrol didn't you?
and the Wagon was LPG with a mixer? So even if the ECU was demanding a richer mix, the mixer wasn't doing so?
__________________
My 11 Second AU Fairlane 364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W |
||
|
|
|
|
06-10-2013, 01:51 AM
|
#7 | ||
|
meh.
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
Wagon is straight petrol, as is the Fairlane. Same engine/box/diff gear setup, same fuel.
Wagon came off straight LPG after less then a month, that used 62L in 120km's no thanks to Autotech and failing to tune it even though I was charged for a tune.
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
|
06-10-2013, 01:52 AM
|
#8 | ||
|
Lacking Imagination
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
|
Use the OBD Tool to see if the Oxygen Sensor is functioning and what your fuel trims are..
Also check your HEGO Fuse in the engine bay to see if it is blown.
__________________
My 11 Second AU Fairlane 364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W |
||
|
|
|
|
06-10-2013, 01:54 AM
|
#9 | ||
|
meh.
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
Will do, I'll report back tuesday
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
|
06-10-2013, 01:54 AM
|
#10 | ||
|
Lacking Imagination
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
|
okay.
__________________
My 11 Second AU Fairlane 364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W |
||
|
|
|
AU Fairlane using 20L/100km's around town, 16L/100km's freeway?? Help ??
Linear Mode
