Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 16-07-2009, 08:29 PM   #1
peejayau99
Starter Motor
 
Join Date: Sep 2007
Posts: 8
Default Noisy Front End

Hi,

My AU Series 1 Wagon has had a noise for a while now in the front end suspension. i can feel it through the footrest. On big bumps or potholes the suspension is normal and quiet, but on small bumps it rattles!

I replaced the shocks and put in nolathane bushes in about 18 Months ago. I can't feel any movement in the wheels when the car is on the jack, so i assume its not the wheel bearings or ball joints.

Any ideas? Any help would be appreciated. Car has done about 220,000kms

Cheers

PJ

peejayau99 is offline   Reply With Quote Multi-Quote with this Post
Old 17-07-2009, 12:14 AM   #2
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

i would still be a bit suspiciouse of the ball joints, are you sure its not the exhaust or something rattling,steering rack looseness, if all else fails i don`t think its a lot of dollars to have a front end check at one of these alignment places, Pedders,computerline ,etc, sometimes its not force that shows the worn part its technique.
mik is offline   Reply With Quote Multi-Quote with this Post
Old 22-07-2009, 10:22 PM   #3
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Sounds like a ball joint to me ... that's what mine sounded like when they needed replacing.

Didn't really see movement until it was on a suspension tester with the front wheels loaded up anyway.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2009, 12:12 PM   #4
GK
Walking with God
 
GK's Avatar
 
Join Date: Mar 2005
Location: Melbourne
Posts: 7,321
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

I'd be getting top and lower ball joints replaced as a matter of service. 220K on the original bits is good life. Thank God the AUs don't wear like the Territory!

GK

Quote:
Originally Posted by peejayau99
Hi,

My AU Series 1 Wagon has had a noise for a while now in the front end suspension. i can feel it through the footrest. On big bumps or potholes the suspension is normal and quiet, but on small bumps it rattles!

I replaced the shocks and put in nolathane bushes in about 18 Months ago. I can't feel any movement in the wheels when the car is on the jack, so i assume its not the wheel bearings or ball joints.

Any ideas? Any help would be appreciated. Car has done about 220,000kms

Cheers

PJ
__________________
2009 Mondeo Zetec TDCi - Moondust Silver

2015 Kia Sorento Platinum - Snow White Pearl

2001 Ducati Monster 900Sie - Red

Now gone!
1999 AU1 Futura Wagon - Sparkling Burgundy
On LPG



Want a Full Life? John 10:10
GK is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:40 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL