side skirts/rear bar ideas?

MrAUII · 15-09-2005, 09:28 PM

I was after some help on some ideas for sideskirts and a rear bar which also go with my front bar. The front bar is a hawk model. I was thinking TS50 sides and rear, my mate says the rebel kit. Is the R Spec rear bar to crap to consider? I am pretty sure I will also keep the boot lid wingless.
Your ideas are appreciated
My car can be viewed at following link
http://www.cardomain.com/ride/2117243

Jarrett!

geza · 17-09-2005, 12:46 PM

MrAUII

Check out AWC for all the body parts you need and support a site sponsor.
I've ordered a complete ts50 bodykit from them and I can't wait to put it on.

Hope this helps
Gerry

sfr rob · 17-09-2005, 10:47 PM

check out my car in the show us ya AU thread, wingless with TS50 side skirts, i reckon it looks tops!!

sfr rob · 17-09-2005, 10:50 PM

oh, what is the go with the blades on your front bar too?? ever thought of getting a full TS50 kit? and color coding your mirrors and door moulds?

MrAUII · 18-09-2005, 08:10 PM

door moulds were cloured today. Blades.... well the winglets are from BMW off the E36. Why? cos its unique and there are far too many cars with the full ts50 kit. I like to be somewhat different.

EvilChief · 18-09-2005, 08:16 PM

what about the XR8 rebel kit ... should look alright

Dark Horse · 18-09-2005, 08:37 PM

Best to get in touch with Turbo_Nick - he's got the hawk front bar with the Rebel skirts and rear bar on his AU.

26-09-2005, 10:00 PM

i think that the best ones 2 suite that wicked front bar would be the TS50 rearbar and skirts. they have the curves 2 go with the winglets. for something different with the zorst i think twin dumpers 3'' and u will get a nice sound.

(nice AUII)

**Uncle_Ken** · 27-09-2005, 09:55 AM

MrAUII
How did you 'paint' the interior? i.e colour and type of paint used etc
Looks good.
Uncle_Ken :Up_to_som
PS I like the Rebel kit for the shirts and rear.

MrAUII · 27-09-2005, 02:53 PM

It was just a spray can of touch up paint from Autobarn. Colour is Metallic Silver but I wouldn't call it silver. Washed all parts in water, then sprayed them with plastic primer which is clear in colour and just helps the paint stick to the plastic. Then paint the colour applying light coats and allow each to dry and finish off with a couple of cloats of clear.

**Uncle_Ken** · 27-09-2005, 03:43 PM

Quote:

Originally Posted by MrAUII

It was just a spray can of touch up paint from Autobarn. Colour is Metallic Silver but I wouldn't call it silver. Washed all parts in water, then sprayed them with plastic primer which is clear in colour and just helps the paint stick to the plastic. Then paint the colour applying light coats and allow each to dry and finish off with a couple of cloats of clear.

How hard was it to get the various bits out? Cluster I know how never tried to remove the rest.
Uncle_Ken

MrAUII · 27-09-2005, 05:13 PM

Simple they all just pop out except passenger side vent need to remove airbag cover as the vent is held in by 2 screws behind it and strip over airbag. You need to disconnect battery(precaution), pop off airbag cover you will more than likely break the clips getting it out about $5 to replace them, un do bolts holding airbag in and unbolt the strip. then just put together in reverse.