|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
13-12-2007, 04:26 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2006
Posts: 12
|
Howdy,
I replaced the head gasket on my mrs 86 KC laser. It started all good, and ruuns smooth. Accept the idle. The car seems to hold the idle a little too high, and doesnt drop when the car gets warm. I noticed i think that it has the auto choke (on the carby) Is there anything i can check to see if ive connected something wrong? Has anyone got a KC laser manual i can have a look at, specifically the carby section? Any ideas as to what i can do? thanks  |
||
|
|
|
13-12-2007, 06:48 PM
|
#2 | ||
|
Starter Motor
Join Date: Dec 2006
Posts: 12
|
ok, had a closer look at it, and ive found the large red wire coming off the auto choke solenoid (large round black thing on passenger side of carby)
I cant tell where it plugs back onto? Anyone know? |
||
|
|
|
|
13-12-2007, 09:37 PM
|
#3 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
pm vippin or the other laser owners
or this forum http://www.fordlaser.com/ I would need a picture -- dont know the laser as well
__________________
My car goes Brumm Brumm |
||
|
|
|
KC laser - replaced headgasket...now it revs too high?
Linear Mode
