Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > Stingray Car Security

Stingray Car Security Gauge holders for ford falcon b series to fg to fgx supplied delivered Australia wide. Triple, double, fpv,single din radio aftermarket radio fascias and ngagauge /turbosmart eboost gauge holders .Message us now!! Website Link

Reply
 
Thread Tools Display Modes
Old 10-08-2011, 09:44 PM   #1
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Talking FG1 and 2 ford new gauge and accessory holder mount by stingray

In recent months I have been working on a solution to the current gauge pod holders I have seen around.
Personally I found a few things I did not like about them.
1 A hefty price..
2 They sat too high on the FG ford blocking the view to pedestrians and the road ahead.
3 Time consuming to install
4 Limited to one two or three gauge holding capability.
5 Limited space for wiring the gauges and avoiding kinks in vacuum boost hoses in the area of installation.
6 The capability for the user to add switches to the same device.
7 The fact that its position made running wires to and from them was not a straight forward process and even required the removal of the icc radio to run wires.
8 They require screws or clips to be fitted
9 Time consuming installation.
As a result I have invented and patented a method to do this .
The new Stingray gauge and accesory holder is installed in 10 seconds.
I am finalising price but it will be very cost effective.
You can house one two or three aftermaket gauges as per your requirement.
Or a combination of switches and gauges in the given space.
There are no clips,screws needed to install the mount.
It uses the existing anatomy of the fg dash to lock into place as I mention in 10 to 20 seconds.
It gives the user room for wiring and vacuum hoses are unobstructed avoiding kink.
Access to power earth and accesories lays right next to the mounting position..
The gauges sit in a central location where the tissue box was recessed into the centre console.
I am finalising this in the next few weeks but wanted to introduce people to the product as I did wait to have legal claim first before releasing it. Over the years I have come up with great ideas I did not protect so this time I was careful and did it properly.
Here in my fg is a prototype and all I can say is I love it No it wont cost an arm and a leg either.. Here are some piccys.

http://fordforums.com.au/attachment....3&d=1312972600

http://fordforums.com.au/attachment....4&d=1312972659

__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again

Last edited by Stav; 10-08-2011 at 09:52 PM.
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 13-08-2011, 12:41 AM   #2
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Painted in black saphire. This is a protype and no finished product
Attached Images
File Type: jpg IMG_0525.jpg (109.3 KB, 777 views)
File Type: jpg IMG_0527.JPG (126.4 KB, 845 views)
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 13-08-2011, 07:43 AM   #3
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,148
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default Re: FG ford new gauge and accessory holder mount by stingray

Reminds me of the old ones I had in my AU ... down nice and low ... but still visible as well.

These look the goods and not in your face either.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 14-08-2011, 09:04 PM   #4
SmokinXR50
Regular Member
 
SmokinXR50's Avatar
 
Join Date: Oct 2010
Location: Melbourne
Posts: 159
Default Re: FG ford new gauge and accessory holder mount by stingray

Hi Stav,

Nice looking gauge holder, can't wait to see the production version.
I would be very keen, especially one that accommodates additional switches. I am figuring the switches will go between the two gauges.

Great way to connect your accessories (i.e. GPS, Phone kit, DVD players or even additional power sockets in the rear) and have the ability to decide when they are being powered.

Definitely keep us posted.

Keep up the good work,

Chris
SmokinXR50 is offline   Reply With Quote Multi-Quote with this Post
Old 15-08-2011, 06:14 PM   #5
tomygun_123
Thomas
 
Join Date: Apr 2011
Posts: 358
Default Re: FG ford new gauge and accessory holder mount by stingray

Not a bad setup, i look forward to your next posts.
tomygun_123 is offline   Reply With Quote Multi-Quote with this Post
Old 15-08-2011, 06:21 PM   #6
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Thank you guys.. I am also thinking an optional engine start button for those who like
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 01-10-2011, 11:05 PM   #7
PHANTMXR6
It's not an FG MKI.......
 
PHANTMXR6's Avatar
 
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,176
Technical Contributor: For members who share their technical expertise. - Issue reason: Willing to help out with useful advice in the technical areas of the forum. 
Smile Re: FG ford new gauge and accessory holder mount by stingray

Stav, found this tonight.

Hope yours comes in cheaper.

(edit... Link removed thanks )
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG...

Want to know how to do an A Service for an FG XR6T?

Look in this http://fordforums.com.au/showthread.php?t=11339404

Thinking of oil sampling your engine?

Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample

Last edited by Stav; 02-10-2011 at 04:02 AM.
PHANTMXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 02-10-2011, 12:31 AM   #8
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

We will be competitive
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again

Last edited by Stav; 02-10-2011 at 04:00 AM.
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 25-11-2011, 04:48 AM   #9
blackiwi
Regular Member
 
blackiwi's Avatar
 
Join Date: May 2011
Posts: 370
Default Re: FG ford new gauge and accessory holder mount by stingray

any more word on this??
__________________
SOLD: 2013 - 5.0L S/C GT MKII

Rear Muffler Delete with dual 3.5" Tips, Winter White, Leather, Sat Nav. Whiteline HD Swaybar, 18% Tint, dark carbon door spears & dash inserts. Blacked out GT Badges, Satin wrapped roof and side mirrors, black tail-light vinyl.

Current Rides:

~600AWHP E85 FBO R35 GTR

15 6.4L Hemi SRT Jeep
blackiwi is offline   Reply With Quote Multi-Quote with this Post
Old 30-11-2011, 12:15 PM   #10
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Guys I have sourced another plastics supplier as this has been the delay. I am hoping to have them soon as possible. Thanks for patience
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 30-11-2011, 06:21 PM   #11
QIK006
Regular Member
 
QIK006's Avatar
 
Join Date: Mar 2007
Location: Tweed Coast, NSW
Posts: 314
Default Re: FG ford new gauge and accessory holder mount by stingray

Hope you have kept it local... I know SS Inductions uses Coastal Plastics in Tweed Heads...
__________________
The only issue with our new FG XR6T is that no one has told me how to prevent the stains on my shorts that happen ever time i mash the accelerator pedal : and now the lil dint in the rear bumber http://www.fordforums.com.au/showthr...30#post4142130

My speed limiter is set to 120 - anything over that and she punches me in the arm.
QIK006 is offline   Reply With Quote Multi-Quote with this Post
Old 30-11-2011, 08:45 PM   #12
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Yes I am giving a local business the job.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 03-12-2011, 09:05 PM   #13
AirStrike
Regular Member
 
AirStrike's Avatar
 
Join Date: Oct 2006
Posts: 483
Default Re: FG ford new gauge and accessory holder mount by stingray

Any updates?
AirStrike is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2011, 10:05 PM   #14
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Prototype is expected to be ready soon then we run them...Hopefully in the next fortnight.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 09-12-2011, 09:41 PM   #15
itsmeajb
First On Race Day
 
itsmeajb's Avatar
 
Join Date: Jun 2008
Location: Brisbane
Posts: 70
Default Re: FG ford new gauge and accessory holder mount by stingray

Hey Stav can you do a set up like this for BF XR8 Ute Auto ?
__________________
BF XR8 Ute MK2 Mercury Silver
itsmeajb is offline   Reply With Quote Multi-Quote with this Post
Old 10-12-2011, 09:13 AM   #16
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Quote:
Originally Posted by itsmeajb
Hey Stav can you do a set up like this for BF XR8 Ute Auto ?
I can try. I will get the fg one out soon then give it a try
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 30-12-2011, 12:51 AM   #17
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Now have several of the first units in stock for whoever is interested. Thanks for your patience
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 30-12-2011, 01:21 AM   #18
blackiwi
Regular Member
 
blackiwi's Avatar
 
Join Date: May 2011
Posts: 370
Default Re: FG ford new gauge and accessory holder mount by stingray

Post pics of the finalized product???
blackiwi is offline   Reply With Quote Multi-Quote with this Post
Old 30-12-2011, 04:45 PM   #19
PHANTMXR6
It's not an FG MKI.......
 
PHANTMXR6's Avatar
 
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,176
Technical Contributor: For members who share their technical expertise. - Issue reason: Willing to help out with useful advice in the technical areas of the forum. 
Smile Re: FG ford new gauge and accessory holder mount by stingray

And price?
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG...

Want to know how to do an A Service for an FG XR6T?

Look in this http://fordforums.com.au/showthread.php?t=11339404

Thinking of oil sampling your engine?

Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample
PHANTMXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2012, 12:24 PM   #20
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Here are some pics of the product. The blank is the product in its original form and then a one two or three gauge setup can be made on request.Gauge holders already out there sell for 270 dollars plus.
Our price $195 dollars each.
Attached Images
File Type: jpg IMG_2216.JPG (124.1 KB, 536 views)
File Type: jpg IMG_2217.JPG (80.2 KB, 389 views)
File Type: jpg IMG_2223.JPG (120.0 KB, 659 views)
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again

Last edited by Stav; 17-06-2012 at 02:56 PM.
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2012, 02:35 AM   #21
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,148
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default Re: FG ford new gauge and accessory holder mount by stingray

Nice work indeed ... colour matched too ... looks pretty factory too.
Even just leaving it as a black fascia looks pretty decent as well.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2012, 06:09 PM   #22
SlowF6
FF.Com.Au Hardcore
 
SlowF6's Avatar
 
Join Date: Nov 2006
Location: SE Melbourne
Posts: 1,671
Default Re: FG ford new gauge and accessory holder mount by stingray

Oh my what a perfect fit!
__________________
Current rides:

Daily
2005 Ford BF Fairlane
SVI Injected LPG. Sunroof. G8 rims.

Weekender
2010 FPV F6 build #89
Process West stage 1 intercooler. Plazmaman stage 2 piping kit, turbo side intake, battery relocation, P1 BOV and surge tank. Atomic valve springs and oil pump. Xforce 4" exhaust. 1000cc injectors. Shockworks coilovers, Staggered 20" V-30. 377rwkw Pitlane

Planned mods: V8 bonnet, Sunroof.

Previous rides:
2008 FG G6E Turbo
1992 Nissan 300ZX TT
2003 BA Fairmont Ghia
SlowF6 is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2012, 08:32 PM   #23
blackiwi
Regular Member
 
blackiwi's Avatar
 
Join Date: May 2011
Posts: 370
Default Re: FG ford new gauge and accessory holder mount by stingray

Anyone who has purchased able to put up example of stav's product with their own gauges?
blackiwi is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2012, 10:43 PM   #24
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Guys I just added a video of the blank and its installation. Thanks for the kind comments.

http://www.youtube.com/watch?v=-tNp7XMM1WI
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2012, 10:49 PM   #25
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,148
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default Re: FG ford new gauge and accessory holder mount by stingray

Nice work Stav ... it's nice how well it just slots/clips in.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2012, 11:38 PM   #26
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Its pretty easy to pop in and just holds really well. No need to muck around
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2012, 07:21 PM   #27
PHANTMXR6
It's not an FG MKI.......
 
PHANTMXR6's Avatar
 
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,176
Technical Contributor: For members who share their technical expertise. - Issue reason: Willing to help out with useful advice in the technical areas of the forum. 
Smile Re: FG ford new gauge and accessory holder mount by stingray

Stav, how do you think the fascia will hold up with the weight of a head unit hanging on it?
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG...

Want to know how to do an A Service for an FG XR6T?

Look in this http://fordforums.com.au/showthread.php?t=11339404

Thinking of oil sampling your engine?

Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample
PHANTMXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2012, 11:03 PM   #28
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

Quote:
Originally Posted by PHANTMXR6
Stav, how do you think the fascia will hold up with the weight of a head unit hanging on it?
Its pretty thick and once in place I am confident it should support a great deal if not all of the radios weight. If you get stuck pm me for further assistance
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 20-02-2012, 09:12 PM   #29
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Re: FG ford new gauge and accessory holder mount by stingray

I am thinking also as mentioned by other members you can run extra power sockets on the panel as well. Portable navigation,phone charger etc..
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2012, 09:01 PM   #30
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,148
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default Re: FG ford new gauge and accessory holder mount by stingray

That's a good idea .... powered USB ports for charging
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL