|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
28-05-2013, 09:07 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2008
Posts: 1,422
|
I noticed after fitting my new wheels, the rear right hand wheel seems to be nicely in line with the guard, whereas the rear left hand wheel sits in about another 7 or 8 mm. Both wheels are measured to the same spec offset-wise.
I noticed when putting on the centre caps, one side wouldn't go on, but the other went on fine. It's as if the threaded stub coming out the center of the hub is slightly longer. Anyone else seen this? My FG XR8 ute has the same problem, only it was about 13mm, so much worse. I appreciate any help. I'm thinking on just rectifying it with a 5mm spacer, but that's not the point. Cheers.
__________________
2011 SILHOUETTE FPV GS 315 #0275 20x10", 20x8.5" Lenso D1R's Pedders XA Coilovers Brembo 4/1 Pacemaker 1" 7/8 Headers Twin 3" Stainless Manta Catback XFT Built Motor XFT Custom Surge Tank XFT Stage 3 ZF Final Drive Chromoly Tailshaft KPM Twin Air Filter KPM Stage 2 Intercooler KPM Twin Throttle Body 2.6L Kenne Bell on E85 BlueStreak Circle D Converter 900+ rwhp thanks to Xtreme Ford Tuning |
||
|
|
|
28-05-2013, 09:38 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2012
Posts: 649
|
Car hasn't been lowered more than factory has it. I am not familiar with the underside of a Falcon but if you lower a Commodore you need to fit an adjustable panhard rod to bring the body back to centre with the diff.
|
||
|
|
|
|
28-05-2013, 09:40 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2008
Posts: 1,422
|
Yeah mate it's on dobinson ultra lows
__________________
2011 SILHOUETTE FPV GS 315 #0275 20x10", 20x8.5" Lenso D1R's Pedders XA Coilovers Brembo 4/1 Pacemaker 1" 7/8 Headers Twin 3" Stainless Manta Catback XFT Built Motor XFT Custom Surge Tank XFT Stage 3 ZF Final Drive Chromoly Tailshaft KPM Twin Air Filter KPM Stage 2 Intercooler KPM Twin Throttle Body 2.6L Kenne Bell on E85 BlueStreak Circle D Converter 900+ rwhp thanks to Xtreme Ford Tuning |
||
|
|
|
|
29-05-2013, 08:47 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 3,633
|
Is it the same with the original wheels; to eliminate one variable in the equation?
|
||
|
|
|
|
29-05-2013, 09:51 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2009
Location: Brisbane
Posts: 1,291
|
It was explained to me at the tyre shop this was a fairly common problem, caused by the FG Diffs not being 100% centered in the vehicle.
|
||
|
|
|
| This user likes this post: |
|
29-05-2013, 11:39 PM
|
#7 | ||
|
BEN
Join Date: Jun 2011
Location: Perth WA
Posts: 4,875
|
The diff cradle isn't centered.
__________________
My Thread. The new whip: 2014 FGX XR8 Auto in victory gold. Mods : BMC air filter, 1500cc injectors, Walbro 485, 58mm kpm snout, kpm intercooler, 35% front and 20% rear tint, pedders supercar coilovers, whiteline sway bars, Phillips HIDs, lenso d1r wheels. 331rwkw. 12.7 sec stock as a rock with a passenger. Now with 620rwhp ready to run the 10 built zf, built tailshaft, corn juice all to come. The old rig: 2008 FG XR8 Auto in dash green with a tonne of mods to make 311rwkw. |
||
|
|
|
| This user likes this post: |
|
30-05-2013, 08:17 AM
|
#8 | |||
|
bitch lasagne
Join Date: Aug 2012
Location: Sonova Beach
Posts: 15,110
|
Quote:
|
|||
|
|
|
|
30-05-2013, 09:31 AM
|
#9 | |||
|
FF.Com.Au Hardcore
Join Date: Jan 2006
Location: Sydney
Posts: 3,866
|
Quote:
__________________
Currently no V8 in the garage! |
|||
|
|
|
Rear Wheels Not Lining Up
Linear Mode
