Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 16-07-2021, 12:25 PM   #1
Bigdogedits
Starter Motor
 
Join Date: Apr 2021
Posts: 2
Default Leakoff pipe O rings

My MB Mondeo TDCI was leaking diesel from the leakoff pipe at the base of number one injector. I contacted the local Ford dealer to buy a new O ring, but they will only sell a complete pipe set ($250). After some searching I managed to source some O rings, and five minutes work fixed the problem. I have more O rings on hand, so if anyone else has the same problem, message me and I’ll send you some.
Bigdogedits is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 16-07-2021, 02:01 PM   #2
alfamale87
Starter Motor
 
Join Date: Sep 2018
Posts: 9
Default Re: Leakoff pipe O rings

Can you tell us what are the o-rings sizes and material?
So people whom may come across this post in years to come can find

Sent from my SM-J810Y using Tapatalk
alfamale87 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 16-07-2021, 02:33 PM   #3
Bigdogedits
Starter Motor
 
Join Date: Apr 2021
Posts: 2
Default Re: Leakoff pipe O rings

Quote:
Originally Posted by alfamale87 View Post
Can you tell us what are the o-rings sizes and material?
So people whom may come across this post in years to come can find

Sent from my SM-J810Y using Tapatalk

I used 4mm ID x 1.5mm viton O rings. It was a tight fit into the injector, and visually it looked like the originals might be 1.3mm, but it is hard to know as mine was leaking, so perhaps had shrunk over the years.
Bigdogedits is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 16-07-2021, 02:42 PM   #4
alfamale87
Starter Motor
 
Join Date: Sep 2018
Posts: 9
Default Re: Leakoff pipe O rings

Legend

Sent from my SM-J810Y using Tapatalk
alfamale87 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:03 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL