![]() |
|
![]() |
#1 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
hey guys/girls..
need some advise concerning headunit installation, going from double to single din, what have you done ? covered up the hole, fitted something from another model under/above cd compartment etc ? also, does anyone know where to get the adapter plugs so i dont have to worry bout re-wiring it all... that would be handy, not a must have, but def a time saver!! cheers oh yeah, and any advise you can give, so i dotn screw somethign up like u have done previously would be great haha |
||
![]() |
![]() ![]() |
![]() |
#2 | |||
Cuban... nothing like it
Join Date: Dec 2004
Location: Watching in amusement
Posts: 11,643
|
Simple Job, I did it on my AU Ts50
Just got a pocket to fit underneath Carnt remember that main car sterio place up on the sunshine coast there behind the Sunshine Plaza shopping centre, but they should have a pocket for you. In regards to re wiring, I would run new speaker and power cables anyhows Cheers
__________________
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
![]() Join Date: Dec 2004
Posts: 12,083
|
yup, use a pocket insert to cover the second din slot.
Part no is: ER 18846 A1 ESCUTCHEON RADIO, DK GRAPHITE - BASE RADIO, FORTE - it's about $17
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Last warning
Join Date: Dec 2004
Location: Mornington Peninsula, Victoria HeadCount: 3
Posts: 11,194
|
try places like autobarn/supercheap auto for the addapters.
they're made by aerpro but are only available for certain brands. they also may have to order one in, i had to get one to install a kenwood cd player in my parents AU, straight change over (10 min job)
__________________
FALCN6 - Turbo, Air Bag Suspension - Hibernating EL GT - Supercharged NASCAR - 83 Thunderbird , Bagged DAILY - BA Fairlane Ghia, Boss 260 Turbo OFFROADER - Ford Explorer ![]() |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
yeh i was gonna run new speaker cable,
in rewiring i meant pulling apart the old harness and wiring it into the new one, if u know what i mean.. thanks guys thats heaps of help! |
||
![]() |
![]() ![]() |
![]() |
#6 | |||
Cuban... nothing like it
Join Date: Dec 2004
Location: Watching in amusement
Posts: 11,643
|
there is a section in tech resources of the site that may be handy when pulling things out
__________________
Quote:
Last edited by Laminge; 27-01-2005 at 12:28 PM. |
|||
![]() |
![]() ![]() |
![]() |
#7 | |||
.
Join Date: Jan 2005
Location: Sunshine Coast
Posts: 1,250
|
Quote:
![]()
__________________
--------------------------------------------- |
|||
![]() |
![]() ![]() |
![]() |
#8 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
pics would be handy!! callin in all AU installation pics! lol..
also, where did you/ if u even did... put the crossover for splits ? tucked up under the dash ? behind the hu, in the door... cant imagine where ot put it safely... |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
Well im glad you asked.
Just finished installing my new splits in my doors sunday. I mounted the crossovers in the door trim as you will see. Speakers are Rockford Fosgate, Power, 6X8 Splits. ![]() ![]() ![]() ![]() |
||
![]() |
![]() ![]() |
![]() |
#10 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
thats pretty!
how do the tweeters sound there ? i have had several spots in mind. dunno if i will be able to do a bang up job like that for my crossovers well see ;) |
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
yeah tweaters sound alright there, i was goin to put them on the a pilliar and get factory grillls ect but decided aginst that... says in the book to put them within 2 inches of the mid or further then 7 inches from the mid, so yeah.
I'll let you no exactillly how well they sound in a couple of weeks when they are run in a bit more. |
||
![]() |
![]() ![]() |
![]() |
#12 | ||
fully *** turboooo
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
|
thats an awsome installation. i had to build pods to fit mine in the door, it sticks out about an inch. how did you fit them in??????
|
||
![]() |
![]() ![]() |
![]() |
#13 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
Theres a 10mm spacer behind the mid but other then that no probs.
|
||
![]() |
![]() ![]() |
![]() |
#14 | |||
Burnin Rubber
Join Date: Jan 2005
Location: Melbourne, Victoria
Posts: 1,824
|
Thats a very nice installation indeed there mate, looked at your site aswell, very nice boot setup indeed.
__________________
2001 AUII Forte (LPG) K&N Air Filter Tickford Air Intake ***Coming Soon: Clear Side Repeaters*** Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#15 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
GRR!! i dont want to have to build out my 6.5" splits, i want them to fit in the factory location easily! bugger..
they are MB Quart somethign or others, cant be bothered looking, they are sittign in my room with my sub and amp all waiting for the head unit to arrive so i can put it all in. how do u have to install it to make it all fit all nice and neatly ??? |
||
![]() |
![]() ![]() |
![]() |
#16 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
well depending how deep ya speakers are you should just be able to make up an mdf spacer to go behind the speaker, screw the speaker in and away ya go.
Not that hard realy. |
||
![]() |
![]() ![]() |
![]() |
#17 | ||
Afterburner + skids =
![]() Join Date: Dec 2004
Location: Skidsville
Posts: 12,113
|
Whats the thingo in the ashtray cover XplodE?
__________________
Speed Kills. So buy an AU XR8 and live forever. Oo\===/oO |
||
![]() |
![]() ![]() |
![]() |
#18 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
It's a Rockford Voltmeter, Shows voltage of my rear battery and has led's around it that as the subs go harder the leds beat and glow from green - orange - red...
Just a **** factor thing, but i love it. But i do also need the voltage gage so i can tell if my back battery is charged ![]() Heres a pic of it at night. ![]() Last edited by XplodE; 09-02-2005 at 09:58 PM. Reason: Add Pic |
||
![]() |
![]() ![]() |
![]() |
#19 | ||
Afterburner + skids =
![]() Join Date: Dec 2004
Location: Skidsville
Posts: 12,113
|
hehe yeah thats cool as
__________________
Speed Kills. So buy an AU XR8 and live forever. Oo\===/oO |
||
![]() |
![]() ![]() |
![]() |
#20 | ||
Guest
Posts: n/a
|
I was gonna start a similar thread to this, but thought i'd just continue this one
![]() Anyone got more pics of Aftermarket Head Unit installs on an AU2 falcon? I'm planning on finally starting/finishing my system which I'm hoping will consist of an Alpine 9831 Headunit (mmm), with either Type R or Eclipse front splits going through the 4 channel MTX amp and MTX 12" sub. I'm kinda scared though, with the curve of the AU2 Falcon dash, it's gonna look like shit. I don't want to "just" get a patch panel thing to cover the gap, I'd much prefer a little CD holder which can hold 3-4 CDs so when I wanna change CDs, I won't need to drive into my massive *** CD Wallet. But with the curve, I don't want it to stick out or anything... So yeh, can people post pics of aftermarket HU's in an AUx Falcon ![]() Also, Is there any quarms with ripping out the dash/doors etc for fitting the Head Unit, splits and wiring? I'll most likely be mounting the tweeters on the front corner tip of the door facing inwards. My mate and I are planning on doing it one weekend, and he is good but never done an install on an AU Falcon. Only on a couple WRX and a Mirage. |
||
![]() ![]() |
![]() |
#21 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
i pulled apart me car ( well sorta . .. ) to see what i would be up for in terms of installation, falcon should be a simple plug and play event!!
PLENTY of room in the doors etc etc to play with wires, door trims and A piller trim comes off easily. should def not have any dramas, that i can think of however. pulling the seats out surely wouldnt be hard, and the rest is history... now i just gotta save for a new deck ( damn parents wanting back that cash of theirs that you "borrowed", it would seem borroed means you have to give it back, no one told me this! ) ill get a whole host of pics when i do my install, to help others etc etc... |
||
![]() |
![]() ![]() |
![]() |
#22 | |||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
Quote:
The rest is pretty simple realy, just watch the depth of ya speakers for the front doors... |
|||
![]() |
![]() ![]() |
![]() |
#23 | ||
Regular Member
Join Date: Jan 2005
Posts: 138
|
What size speakers come standard in the AU's (AU2 Forte/Futura)? (AU2's look like good value, I'd consider saving the extra, and getting one when I upgrade, instead of an EF)
Last edited by Deanodriver; 16-02-2005 at 10:26 PM. |
||
![]() |
![]() ![]() |
![]() |
#24 | ||
Regular Member
Join Date: Jan 2005
Location: Geelong
Posts: 465
|
5x7's are standard, the front can take 6.5" easily if you make a spacer out of MDF
Cheers, Phil |
||
![]() |
![]() ![]() |
![]() |
#25 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
i got 6X8's in mine with about a 8-10mm spacer, depth is the main problem...
|
||
![]() |
![]() ![]() |
![]() |
#26 | ||
Regular Member
Join Date: Jan 2005
Location: Geelong
Posts: 465
|
I have some JL Audio 6.5" splits in the front, was a simple task with some 6mm mdf, they arent real deep tho
|
||
![]() |
![]() ![]() |
![]() |
#27 | ||
Guest
Posts: n/a
|
Anyone in Brisbane have the removal tool thingy for the HU I could borrow over a weekend to get my stockie AU2 out?
![]() |
||
![]() ![]() |
![]() |
#28 | ||
Now With 2 Cylinders More
Join Date: Jan 2005
Location: Sunny Coast, QLD
Posts: 346
|
i may also have to borrow this tool soon! ie within a month or so... or anyoen on the sunny coast that have it ? or should i just be lazy and pay maroochy car sound to the whole shebang.... sounds good to me! im such a lazy **** haha, ill so the speakers and amp tho, so i can say i did it ;)
|
||
![]() |
![]() ![]() |
![]() |
#29 | ||
Smashed Gecko Racing
Join Date: Jan 2005
Location: Mildura
Posts: 171
|
4 long screw drivers or a bent up coat hanger should do the trick...
|
||
![]() |
![]() ![]() |
![]() |
#30 | ||
Afterburner + skids =
![]() Join Date: Dec 2004
Location: Skidsville
Posts: 12,113
|
I used the screwdriver method to get mine out, but I rendered the stock unit unuseable but.
__________________
Speed Kills. So buy an AU XR8 and live forever. Oo\===/oO |
||
![]() |
![]() ![]() |