|
|
|
|
|
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
17-08-2006, 09:46 AM
|
#1 | ||
|
Regular Member
Join Date: Oct 2005
Posts: 47
|
I Have Ef Fairmont And Drivers Door Electric Window Regulator Broke Yesterday,after Pulling Off Panel Do You Have To Drill Out 3 Rivits That Hold The Motor In Place So I Can Replace Motor And Regulator Or Is There Something Else That Holds Motor On Door,any Help Would Be Appreciated
|
||
|
|
|
17-08-2006, 05:13 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 514
|
i hit them out with a hammer lol.
|
||
|
|
|
|
17-08-2006, 05:40 PM
|
#3 | ||
|
growing up is optional
Join Date: Feb 2006
Location: Gawler area SA
Posts: 3,303
|
Drill out the 3 rivets that hold the motor in place. Support the glass and undo the two 10mm bolts that hold the glass to the regulator, then the 2 nuts and 2 bolts that hold the regulator to the door.
|
||
|
|
|
|
17-08-2006, 11:39 PM
|
#4 | ||
|
Regular Member
Join Date: Aug 2006
Posts: 286
|
I just replaced my whole assembelly was $180 For a generic..but better than Fords..
Fords $270 |
||
|
|
|
Ef Fairmont Replace Electric Window
Linear Mode
