Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 27-11-2020, 12:53 PM   #1
dckmedia
Starter Motor
 
Join Date: Oct 2020
Posts: 2
Default Ford Fiesta 2008 WQ - AC pressure test

Hi All

I have an issue with my AC, which it is not doing a good job on hot days(above 30c days)

On a normal day(outside temperature less than 30), I can hear AC clutch cycles on constant time periods and AC is cold enough, but when the outside temperature is above 30, I can hear the clutch cycles frequently than a normal day, and AC is not very cold.

I have tested the system using the manifold gauge and below are the readings.

Car not started - Static system pressure
Outside temperature - 21c
AC High gauge - 65psi
AC Low gauge - 70psi

Pressure gauge - static pressure reading - image

When I reading about the static pressure on this forum, I found most people saying static pressure should be equal on both sides, but mine seems to be 5-10 psi less on the high side.

Then I started my car turn on the AC and I have recorded the movement of the gauges you will find it in the below video.

AC pressure test video

When the AC clutch engaged, the high side goes a maximum of 110 - 120 psi only and I can hear the AC clutch turns off. Also noticed that the indicator of the gauge is a bit wobbly when it reaches 110psi. I don't think the gauge is faulty as I have connected it to another car of my fried and it seems to have no issues.

I don't have much knowledge about car ac systems, but every form i read people mention the high side should be at least 150 psi but mines cut off near 110. Is it a problem with my high-pressure switch? or im low or high on R134a

Any diagnostic advice much appreciated.
dckmedia is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2021, 04:09 PM   #2
Luke Plaizier
Lukeyson
Donating Member1
 
Luke Plaizier's Avatar
 
Join Date: Mar 2005
Location: Maitland, NSW
Posts: 2,586
Default Re: Ford Fiesta 2008 WQ - AC pressure test

Can you see this link? It has some handy troubleshooting steps regarding the high pressure and low pressure switches. Given I am 8 months late in replying I assume you have solved your problem by now?

http://fordforums.com.au/wsmpub/wq95/412-00.html

Luke
__________________
If the human brain was simple enough to understand, we'd be too simple to understand it.
Luke Plaizier is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:10 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL