|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-01-2009, 08:49 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2008
Posts: 12
|
Hi guys,
Posted the same thread in tech for 6's with not a lot of response. Having had 4 V8 TC/TD and TE Cortinas in the past, 10 years has past, the bug has bitten again and I now find myself wanting to build another Corty, but with a tough, street registered six instead. I'm sure there are plenty of you on here who have either self built or had built a tough 250 in Melbourne. Can anyone point me in the right direction on building one myself or a reputable engine builder that doesn't charge an arm and a leg for a reliable tough motor combo. Thanks. |
||
|
|
|
22-01-2009, 11:08 AM
|
#2 | ||
|
From the Futura
Join Date: Mar 2007
Location: Canberra, Australia
Posts: 569
|
I'm about to swap an efi alloy head six turbo/celica 5 speed combo out of my TD cortina in order to try a 4.0L six/T5. The later engines can make a bit more power i am thinking..
|
||
|
|
|
|
22-01-2009, 12:29 PM
|
#3 | ||
|
Regular Member
Join Date: May 2006
Posts: 72
|
I would say that the price would depend on the parts that you want to use in the motor wouldn't it?
What do you want to do with the car? Just a tough Streeter or something that you can drag race all of the time? I would say something with a bit of head work a nice cam and maybe some ACL race series pistons and 200CI rods would be a good decent combo, I’ve driven a couple of mates corty's with similar combo's and they go very well and weren't that much to build, i recall one of my mates paying about $1500 for his motor and pistons, but he already had the cam and a couple of other things. On a bit of a side topic, I’m rebuilding my corty at the moment and could do with getting rid of some performance parts that are suited to a 6 if you need anything just PM me and I’ll see if i can help out, I’m in Sydney tho but i don't mind posting some stuff. PS the parts mostly suit TC/TD cortys but some of the stuff can be swapped or adapted. Good luck with the build mate, sound like it will be a great car! Cheers mate
__________________
Current Project: Rebuilding my Corty! 220kw Au3 XR8 Engine, full Custom Zorst, EMS Computer, Underdrive pulleys and MSD coil Parks. TKO Tremec 5 Speed Full Floater 9in 31 Spine with locker Its almost there!!!! |
||
|
|
|
|
22-01-2009, 07:10 PM
|
#4 | ||
|
Starter Motor
Join Date: Jun 2008
Posts: 12
|
Thanks for the feedback guys.
As I now have a family to think of as well, I would be looking to spend around $4000 on parts to build myself, as I would want a tough reliable street combo (which could still post a reasonable number at the strip, 13's?) that I know will not cause me too many hassles, even when it get a few km's on it. Unfortunately, V8's are to hard to get engineered these days, so a tough n/a 250 will do until I have a chance to look at a later model engine and box combo. Perfoming the mods you have suggested 75, with a decent carb/ manifold and exhaust, what sort of flywheel horses would you roughly be looking at? On a different note, what do TE/ TF sedans roughly weigh in street trim? Thanks again. |
||
|
|
|
250 Engine Combos
Linear Mode
