|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-11-2011, 10:59 AM
|
#1 | ||
|
Regular Member
Join Date: Oct 2011
Posts: 32
|
Hi,
Just to let you guys know out there that it's worth upgrading your H7 dipped beam bulbs. I thought the lights on my MA mondeo were pretty good but could probably do well with a upgrade. So i order from ebay a pair of osram night breaker plus (thought philips xtreme are excellent choice too but more expensive) from a UK ebayer for about $25 delivered... Taking the light out was a bit tricky but with the help of the manual and the fordwiki i got it out, unclipped the back and put them in. Difference was noticeable straight away. It is tricky putting the light cluster back in, but give yourself plenty of time and also tape up just below the light cluster on the bumper so you dont scratch it. good luck! |
||
|
|
|
18-11-2011, 06:19 PM
|
#2 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Surprised you would need to remove the headlight clsuter.
Surely there is an access hatch on the back of the light ? |
||
|
|
|
|
18-11-2011, 06:21 PM
|
#3 | ||
|
Regular Member
Join Date: Oct 2011
Posts: 32
|
Sadly even the manual says you have to because it's too close to other components.
http://www.fordwiki.co.uk/index.php?..._%E2%80%93_Mk4 I've had a look at the battery and that looks even more tricky judging by that's installed. |
||
|
|
|
|
12-12-2011, 12:50 PM
|
#4 | ||
|
Mot Adv-NSW
Join Date: Jun 2005
Location: Lake Macquarie, NSW
Posts: 2,153
|
Mmm, you should try that with the MB and MC:-) Same:- out, rause!
__________________
ORDER FORD AUSTRALIA PART NO: AM6U7J19G329AA. This is a European-UN/AS3790B Spec safety-warning triangle used to give advanced warning to approaching traffic of a vehicle breakdown, or crash scene (to prevent secondary). Stow in the boot area. See your Ford dealer for this $35.95 safety item & when you buy a new Ford, please insist on it! See Page 83, part 4.4.1 http://www.transport.wa.gov.au/media...eSafePart4.pdf |
||
|
|
|
Headlight bulb upgrade - done!
Linear Mode
