Hard to get bits Wanted or For Sale - Page 3

Tha Jack · 09-05-2008, 10:06 PM

Cmon Guys,
Surely some ones got a spare GS grille just waiting to be fitted to a red pepper coupe. :voldar02:
Unfortunately the roo smashed both the spotlight rings so I cant convert a standard Grille

:

FTGAutosalvage · 10-05-2008, 04:54 PM

Quote:

Originally Posted by Tha Jack

Cmon Guys,
Surely some ones got a spare GS grille just waiting to be fitted to a red pepper coupe. :voldar02:
Unfortunately the roo smashed both the spotlight rings so I cant convert a standard Grille

:

i have a fairlane grille lying around at work . you can have it and cut the rings out.

bob 351 · 23-05-2008, 05:35 PM

Quote:

Originally Posted by Tha Jack

Cmon Guys,
Surely some ones got a spare GS grille just waiting to be fitted to a red pepper coupe. :voldar02:
Unfortunately the roo smashed both the spotlight rings so I cant convert a standard Grille

:

yes you can get a couple of ring's out of a zg or zf fairlane i got if you want

xe351 · 10-05-2008, 04:01 PM

i cant help with the grill, but if your handy this might help http://www.fordforums.com.au/showthr...light=gt+grill

Tha Jack · 10-05-2008, 05:45 PM

Cheers Darren. Are the rings the same as XB rings? Looking at the other thread posted by xe351, all the conversions have been done on XA's.

FTGAutosalvage · 10-05-2008, 06:33 PM

Quote:

Originally Posted by Tha Jack

Cheers Darren. Are the rings the same as XB rings? Looking at the other thread posted by xe351, all the conversions have been done on XA's.

im not sure mate. but its yours if ya want it.

I do have a XB GS grille but its still in my GT , I should pull it out and check condition.

Tha Jack · 10-05-2008, 06:49 PM

Quote:

Originally Posted by FTGAutosalvage

im not sure mate. but its yours if ya want it.

I do have a XB GS grille but its still in my GT , I should pull it out and check condition.

Great Darren thanks. I'll check the grille on your GT if you want. Just leave the keys it in

RAREV8 · 23-05-2008, 04:08 PM

Hi guys, Just back from Europe so had a play with the Landfill and found a couple of bits that I need to get. Has anyone got one or two of the rear side quarter parking light lenses? I have several off other coupes but the lenses are wrong. I don't need the backing part, nor the chrome curved surrounds but happy to take if needed.
Also happy to swap the ones I have if someone needs them! From what I can see, the Landau ones are more curved and have a different looking red/yellow reflector.
1x P5 LTD bonnet and bootlid, I don't need the chrome trims/badges necessarily and preferrably in Sydney due to transport!
1x XA type tank, i.e. with no breather pipes, if someone has one lying around!

Any help would be much appreciated!

Cheers, Jamie

Auslandau · 23-05-2008, 06:33 PM

Quote:

Originally Posted by RAREV8

Hi guys, Just back from Europe so had a play with the Landfill and found a couple of bits that I need to get. Has anyone got one or two of the rear side quarter parking light lenses?

Any help would be much appreciated!

Cheers, Jamie

I will let you know tommorrow Jamie. I dropped into a shop a while back that had some in a box marked misc .... they are brand new and I bought a couple for $25.00 each. Will drop past and see if there are still some there.

| [/url] |

JG66ME · 05-06-2008, 03:45 PM

Quote:

Originally Posted by RAREV8

Has anyone got one or two of the rear side quarter parking light lenses?

Cheers, Jamie

Jamie

The Landau ones are the same as ZG Fairlane. ZH Fairlane fit but are not the same. ZH Fairlane is, incidently, the same as XC Coupe.

Steve

Auslandau · 05-06-2008, 04:14 PM

Quote:

Originally Posted by JG66ME

Jamie

The Landau ones are the same as ZG Fairlane. ZH Fairlane fit but are not the same. ZH Fairlane is, incidently, the same as XC Coupe.

Steve

I know you have both there to compare but i thought the Fairlane ones ZG were flatter. I bought a set ages ago from Ebay and they werent the same as the Landau's fatter, curved ones.

| [/url] |

JG66ME · 05-06-2008, 05:49 PM

Quote:

Originally Posted by auslandau

I know you have both there to compare but i thought the Fairlane ones ZG were flatter. I bought a set ages ago from Ebay and they werent the same as the Landau's fatter, curved ones.

Dave, the flatter one dosnt have a seperate surrond, thats the ZH /XC one. Yes I do have both ZG and Landau and they are the same. Thats the one with the seperate chrome bezel.

Steve

Auslandau · 05-06-2008, 09:51 PM

Quote:

Originally Posted by JG66ME

Dave, the flatter one dosnt have a seperate surrond, thats the ZH /XC one. Yes I do have both ZG and Landau and they are the same. Thats the one with the seperate chrome bezel.

Steve

YEP! Just saw a set on ebay for sale. THere you go, thought they were for Fairlane.......... so then, seeing I aint getting a Cobra or another XC for sometime ......

Any one need a set?...... I would say as new!

| [/url] |

RAREV8 · 11-06-2008, 02:46 AM

Quote:

Originally Posted by auslandau

YEP! Just saw a set on ebay for sale. THere you go, thought they were for Fairlane.......... so then, seeing I aint getting a Cobra or another XC for sometime ......

Any one need a set?...... I would say as new!

They are the ones that I have too.....still chasing the proper Landau ones!

xccoupe · 23-05-2008, 06:59 PM

Hi all, would anyone know where I can get either a new ignition module for a v8 XC/ZH or the old one repaired.
I would like to try and keep all of the standard ignition system.
Cheers Tony

Pinkbits · 23-05-2008, 07:48 PM

Quote:

Originally Posted by xccoupe

Hi all, would anyone know where I can get either a new ignition module for a v8 XC/ZH or the old one repaired.
I would like to try and keep all of the standard ignition system.
Cheers Tony

Where are you located?

xccoupe · 24-05-2008, 12:03 AM

Quote:

Originally Posted by Pinkbits

Where are you located?

Hi Mark S.E Melbourne!

CJR09 · 26-05-2008, 06:47 PM

Hi all - I have some louvres for sale factory rpo84 type if anyone is interested....

http://fordforums.com.au/showthread.php?t=11221940

Cheers, Cheyne

xr393 · 27-05-2008, 07:42 AM

Quote:

Originally Posted by CJR09

Hi all - I have some louvres for sale factory rpo84 type if anyone is interested....

http://fordforums.com.au/showthread.php?t=11221940

Cheers, Cheyne

Out of curiousity what are they made out of. I know someone who has been searching for a genuine one but he might settle for a repo.
Cheers Steve

CJR09 · 27-05-2008, 08:31 AM

Quote:

Originally Posted by xr393

Out of curiousity what are they made out of. I know someone who has been searching for a genuine one but he might settle for a repo.
Cheers Steve

Hi Steve, they are made of fibreglass - in comparison to the origional's they are slightly stronger by use of a higher strength resin.

Cheers, Cheyne

CJR09 · 28-05-2008, 09:21 PM

Quote:

Originally Posted by CJR09

Hi all - I have some louvres for sale factory rpo84 type if anyone is interested....

http://fordforums.com.au/showthread.php?t=11221940

Cheers, Cheyne

I have lowered price for forum members....

shrek73 · 26-05-2008, 07:13 PM

hey superbird owners im looking for someone with an unused superbird decal who can scan and email me .
ive been asked to glass etch that design on to plate glass
many thanks les

CJR09 · 26-05-2008, 08:11 PM

Quote:

Originally Posted by shrek73

hey superbird owners im looking for someone with an unused superbird decal who can scan and email me .
ive been asked to glass etch that design on to plate glass
many thanks les

Hey Les, if you go to the website xasuperbird.com there is a decent example of the glove box decal on the home page - might pay to check with Ben (website designer - you can reach him through admin contact) where he got image from and if he modified it at all - I dont think he has but would pay to check just in case.

Might be easier to get one of the glove box decals yourself, they are about $25 from memory, the decal kits floating around these days use an enlarged version of the glove box decal for the rear quarter decal which isn't quite right.

There was an origional set on ebay half a year or so ago, not sure if it sold as I thought at the time he was asking too much for it - $400 from memory

Cheers, Cheyne

P.S. If anyone does happen to have a set of NOS Superbird decals I too would be interested in purchase... may have a better chance with rocking horse poo though.....

GT-GTF · 01-06-2008, 10:46 PM

If any one has a dash pad and auto console in vgc for sale please pm me. Prefer local Sydney but will pay postage for right item.

gtxb67 · 01-06-2008, 11:31 PM

Quote:

Originally Posted by georgevlah

If any one has a dash pad and auto console in vgc for sale please pm me. Prefer local Sydney but will pay postage for right item.

hey george, pm palace a a r c.. although he is in melbourne, tas may be able to help

GT-GTF · 02-06-2008, 06:48 PM

thanks for that. i'm also after the plastic vent that goes in the pillar behind the door. I'll ask tas about that also. if anyone else has one pls let me know

GT-GTF · 03-06-2008, 11:50 PM

Quote:

Originally Posted by georgevlah

thanks for that. i'm also after the plastic vent that goes in the pillar behind the door. I'll ask tas about that also. if anyone else has one pls let me know

I am also after a nice set of fat rims and tyres to suit my coupe. looking to save money by buying 2nd hand, must be in Sydney

cob115 · 01-12-2008, 08:17 AM

Quote:

Originally Posted by georgevlah

If any one has a dash pad and auto console in vgc for sale please pm me. Prefer local Sydney but will pay postage for right item.

howdy george ,iv got dash oridgional redoing my xb dash pad ,expencive compaird to if u can get a good 2nd hand one,hard to get nowadays with out cracks ,but they do top work and make it look like factory ,they also repaire recon centre consoles factory door trims ,theyll be redoing my xc cobra door trims next year , in holden hill south aust ,webb www.dashoriginal.com.au
ph 83693000

GT-GTF · 01-12-2008, 08:39 AM

Quote:

Originally Posted by cob115

howdy george ,iv got dash oridgional redoing my xb dash pad ,expencive compaird to if u can get a good 2nd hand one,hard to get nowadays with out cracks ,but they do top work and make it look like factory ,they also repaire recon centre consoles factory door trims ,theyll be redoing my xc cobra door trims next year , in holden hill south aust ,webb www.dashoriginal.com.au
ph 83693000

Cheers Pat. I managed to get my hands on a mint console and dash from my cousin at Fairford Spares out of an old V8 Fairmont sedan he recently bought for wrecking. They are sitting snugly in my coupe!

Oxa384 · 05-06-2008, 06:49 PM

Hi,If any one has a L/H (guard) XA front eyebrow mould in gc for sale please pm me. Prefer Brisbane area to pick up but willing to pay postage for right item.thanks dave