AU ECON/POWER Button

[Erich]

I know its old stuff but can this be linked again - the link no worky :(

[Silver']

Just in case anyone else stumbles across this thread, here's a reliable link that details the method to switch trans modes.

http://web.archive.org/web/200110232...p?menu=tseries

Sorry to drag up an old thread...

[Silver']

Bah! That didn't work! Oh well, the below is an excerpt from the T-series (T2) manual for ESS.

Selecting ADP sub-modes

1. Stop the vehicle, apply Park Brake and turn Ignition Off.
2. Apply Foot Brake and move gear selector to:
   • 1 for Maximum Performance Mode
   • 2 for Maximum Economy Mode
   • 3 for Adaptive Shift Strategy
3. Turn the ignition On and wait for the air bag warning light to turn off.
4. Move the selector to "R" and wait for the segment on the cluster to confirm the mode selected:
   PEF - Maximum Performance Mode
   ECO - Maximum Economy Mode
   ADP - Adaptive Shift Strategy
5. Return gear selector to "P" and start the engine.
6. Programmed modes will remain unless the EEC is reprogrammed by the above procedure or the vehicle battery power is removed.

Default mode after battery reconnection is ADP.

[Froste666]

Originally Posted by SilverT2TE50

Bah! That didn't work! Oh well, the below is an excerpt from the T-series (T2) manual for ESS.

Selecting ADP sub-modes

1. Stop the vehicle, apply Park Brake and turn Ignition Off.
2. Apply Foot Brake and move gear selector to:
   • 1 for Maximum Performance Mode
   • 2 for Maximum Economy Mode
   • 3 for Adaptive Shift Strategy
3. Turn the ignition On and wait for the air bag warning light to turn off.
4. Move the selector to "R" and wait for the segment on the cluster to confirm the mode selected:
   PEF - Maximum Performance Mode
   ECO - Maximum Economy Mode
   ADP - Adaptive Shift Strategy
5. Return gear selector to "P" and start the engine.
6. Programmed modes will remain unless the EEC is reprogrammed by the above procedure or the vehicle battery power is removed.

Default mode after battery reconnection is ADP.

so is this for au or ba

[EL.50]

Originally Posted by Froste666

so is this for au or ba

Says up the top it is from a T series manual for T2, So AU.

[azza11]

I leave mine on standard, when i was using the econ, i reckon the above statements on the auto are correct. I think line pressure is also affected to the auto, maybe not, but these autos are pressure sensitive.

[Silver']

Yup, AU. No idea about BA.

[Froste666]

Ok so that's how you program the mode for manual transmition and does it work on auto? forgive me for sounding confused there are just so many comments and all the links go nowhere for me so many different reply's on the page

[Froste666]

After battery reset does it go to adaptive as default or no

[rmack]

Originally Posted by Froste666

Ok so that's how you program the mode for manual transmition and does it work on auto? forgive me for sounding confused there are just so many comments and all the links go nowhere for me so many different reply's on the page

This is only for AU Automatic Transmissions that do not have the POWER/ECON button next to the T Shifter.

After battery reset does it go to adaptive as default

Yes. Adaptive by default

[rmack]

Originally Posted by SilverT2TE50

Yup, AU. No idea about BA.

On a BA falcon there are three shift modes. Normal, Performance, and Manual. when you put the car on "D" it will drive normal Adaptive Shift. When you push the stick to the left it will go into Performance mode. Its still fully automatic and will shift at a higher rpm and downshifts quicker, then once you push the stick up or down (+/-), it will go into manual.