|
27-05-2008, 10:51 PM | #1 | ||
Starter Motor
Join Date: May 2008
Location: Geelong
Posts: 8
|
Hi there
My first post and a technical question. Had plenty of mechanical experience with a variety of vehicles but I have never replaced the clutch on this model. My partners Laser is showing signs of a slipping clutch which means the plate is probably on the way out and needs to be replaced along with the pressure plate and release bearing. Anyone done one of these models? Tips and hints appreciated. Any manuals or pdfs available for viewing would be a huge help. Cheers |
||
09-06-2008, 12:53 PM | #2 | ||
Starter Motor
Join Date: May 2008
Location: Geelong
Posts: 8
|
Hi
Can no-one offer any help? Cheers |
||
09-06-2008, 02:07 PM | #3 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
no unusual traps
special tools required clutch aligning tool torque wrench the motor can stay in and take the gearbox out from underneath or you can take the motor and gearbox out and fix other things on the way back in such as CV boots, seals and the engine mounts
__________________
My car goes Brumm Brumm |
||
15-06-2008, 11:17 PM | #4 | |||
Starter Motor
Join Date: May 2008
Location: Geelong
Posts: 8
|
Quote:
Cheers |
|||