![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
too many fords
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
|
I Just had a look on the king springs website at some lower springs. It says that the SL's are the same height as the XR's. Is this right? Am looking at bringing the car down a little bit more in the front and putting SSL's in the rear
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Drought Breaker
Join Date: Oct 2005
Location: Gunnedah, NSW
Posts: 199
|
I've just ordered new King springs for my ute and the lows where stated to be 365mm from centre of wheel to peak of the wheel arch, super lows are 355 measured the same. In my ute the superlows leafs will drop the ИИИИ from where it sits now 110mm, mind you i can park next to an RTV and my ИИИИ is only an inch lower than the RTV?!!
Now I was also told that they were 30-35 below standard XR height (superlows that is). Hope that gives you some indication of heights.
__________________
2002 AUIII XL W/- Custom Tray
ALL COUNTRY: SW Platt Mccann 5 Poster, GME 4706 7' Whippys, Uniden UH015SX UHF AND Scanner combo, Narva Taurus Bull lights, Hawk Grille, Series II Pursuit Side Skirts, Stickers on the back window and more eartags than a mob of cranky angus ![]() ALL GO: XR6 VCT donk and ECU NO MORE!! Now even MORE fun with 200kw XR8 and 5 speed, Tickford Cluster, 3.45 LSD, full custom twin system w/- 3" chrome angle cut tips ![]() |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
too many fords
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
|
Thanks. Ill have to try them out and se what works best.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Miami Pilot
![]() Join Date: Jan 2005
Location: ACT
Posts: 21,701
|
I just put SLs in mine 2 weeks ago, and dropped 15mm front, and 25mm rear - that's from XR height (AU1).
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|