|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-11-2016, 09:16 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2016
Posts: 11
|
Gents.
I've got an '07 Zetec, and the other day I bought an '06 XR5 Turbo spoiler from a write off as I finally found one in red. Upon fitment of the new spoiler this afternoon, I found the brake light connectors are unfortunately different! So, I'm running without a spoiler light for now. Is there an adapter for such a thing? Or would it be best for me to contact the seller of the spoiler and see if they can chop off the plug from the XR5T and send that to me so I can attach it to my Zetec wiring? |
||
|
|
|
18-11-2016, 04:38 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
I doubt an adapter exists. I think you've already got the best solution in your post above
|
||
|
|
|
|
18-11-2016, 05:23 PM
|
#3 | ||
|
Starter Motor
Join Date: Aug 2016
Posts: 11
|
All good, I made contact with the seller and they're gonna post out the connector from the XR5 Turbo and I'll just solder it onto the Zetec wiring.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
'07 Zetec spoiler swap
Linear Mode
