|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-06-2006, 02:23 PM
|
#1 | ||
|
BEER I NEED BEER
Join Date: Feb 2005
Location: gold coast
Posts: 177
|
hey all just a couple of questions on this. i have just about all the stuff to do the job now just wondering with the wiring for it is it all there to plug in or what, on the pedal box i have there is a sencer on the clucth pedal where does that plug in? and with the wires on the actull box do they all plug into plug alredy there? i have also herd you need to wire in the reverse lights how do you go about this? and also does any one know anywhere in logan, brisbane or goldcoast that can redo my auto ecu to run the manual? has anyone actully done this change themselvs not by a workshop?
__________________
__________________
worked hard to get my new beast and i love it, it rocks. MYR16 the beast |
||
|
|
|
29-06-2006, 08:02 PM
|
#2 | ||
|
Kick out tha Jams
Join Date: Mar 2006
Location: SA
Posts: 443
|
mine was done at a workshop - and im glad it was, there was a stack of messin around with the electrical side of things and the number of times they had to call out the auto electrician ended up costing them more than I paid them!!!
having said that GOOD LUCK!
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats! |
||
|
|
|
|
29-06-2006, 09:27 PM
|
#3 | ||
|
BEER I NEED BEER
Join Date: Feb 2005
Location: gold coast
Posts: 177
|
thanks how much did it cost? i will alredy have all the stuff
__________________
worked hard to get my new beast and i love it, it rocks. MYR16 the beast |
||
|
|
|
|
29-06-2006, 10:59 PM
|
#4 | ||
|
Kick out tha Jams
Join Date: Mar 2006
Location: SA
Posts: 443
|
its a bit hard to say as the price i paid included the gearbox + motor price which was $3000 all up installed, whereas on thier own they wanted $1850 for the gearbox and $1650 for the motor not including labour (bizzare pricing, cheaper to have it installed!).
Have a good phone around as prices varied HUUUUGELY from place to place. the next cheapest I found for a conversion if I provided the parts surprisingly enough was profix for $1000!!! I would be surprised if you couldnt find somewhere to do it for under $500 in brizzy if you do the homework 1st.
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats! |
||
|
|
|
|
30-06-2006, 01:08 PM
|
#5 | ||
|
BEER I NEED BEER
Join Date: Feb 2005
Location: gold coast
Posts: 177
|
thanks heaps for that mate
__________________
worked hard to get my new beast and i love it, it rocks. MYR16 the beast |
||
|
|
|
|
30-06-2006, 01:19 PM
|
#6 | ||
|
justa6
Join Date: Jun 2005
Posts: 664
|
there are 2 little flat plugs on the side of the manual for your reverse. the speedo is a 3 wire triangle looking plug.
|
||
|
|
|
|
30-06-2006, 05:36 PM
|
#7 | ||
|
FTF Club Moderator
Join Date: Jan 2005
Location: Driving my Tickford T3 Wagon in Sydney
Posts: 3,132
|
PM LG. He has done this conversion.
__________________
Albert Einstein: Es ist schwieriger, eine vorgefaßte Meinung zu zertrümmern als ein Atom. (It is more difficult to alter a preconception than split an atom) Falcon Tickford FPV (FTF) Car Club of NSW Fords in the Park 2010 I use and recommend Stingray Car Security. http://www.stingraycar.com.au/ |
||
|
|
|
|
01-07-2006, 11:08 AM
|
#8 | ||
|
BEER I NEED BEER
Join Date: Feb 2005
Location: gold coast
Posts: 177
|
thanks guys you help is much appreciated
__________________
worked hard to get my new beast and i love it, it rocks. MYR16 the beast |
||
|
|
|
|
01-07-2006, 01:03 PM
|
#9 | ||
|
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
the speedo one is the only plug that will match straight up, reverse switch wiring is within the big plug which also includes all the solonoids. need to look for the neutral switch wires in order to hotwire it
before you put ur pedal box in, double check all ur welds, especially the one on the clutch pedal, as that one is very common to break. its much easier to reweld it while its out of the car the sensor on the clutch pedal is for cruise control, if u do have CC, you can crosswire it to the sensor on the brake pedal or simply ignore it as for ecu u do not need to change it if u lock it into neutral.
__________________
N12 Pulsar - sold Gen1 Liberty Turbo - sold VP Commodore Turbo - sold LN65 Hilux Turbo - sold EL31 Corolla Turbo - sold Ford AU Ute Turbo - sold Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build) Ford BA XR6T Ute - daily driver Ford FG XR6T Sedan - cruiser do you see a general trend? I DO  Can't live with it, can't live without it! |
||
|
|
|
|
01-07-2006, 01:27 PM
|
#10 | ||
|
BEER I NEED BEER
Join Date: Feb 2005
Location: gold coast
Posts: 177
|
thanks for that evil and thanks for the pm too very helpfull
__________________
worked hard to get my new beast and i love it, it rocks. MYR16 the beast |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
changing au2 to manual
Linear Mode
