Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 15-02-2007, 06:16 PM   #1
eXi7w0unD
Regular Member
 
eXi7w0unD's Avatar
 
Join Date: Nov 2005
Location: Brissy!
Posts: 472
Default dash lights

yea my dash lights are really dim.. every thing in the cars is bright cept the milage and the aircon screen where u can see what temp etc, the rest is fine. should i get ford to fix it or what.

__________________
i won.
eXi7w0unD is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2007, 11:37 AM   #2
ayetobee
Starter Motor
 
Join Date: Jan 2007
Posts: 8
Default

hey eXi7w0unD

I have the exact same problem at the moment with mine. There are three very small bulbs at the back of the cluster that light up the lcd display. I pulled my cluster out last weekend which is very easy to do. Two small screws at the top then gently pry out the whole thing from the dash. There is wiring at the back that you unclip and the whole cluster comes away.
YOU DO NOT NEED TO TAKE THE THING APART. Just turn it over and at the back you will find the underside of bulbs (that look a lot like led's when removed, mine have a green plastic underside) in the cluster. Mine have H2 written on them. You need to replace these bulbs, you can simply screw them out. I tried Autobahn, Supercheap and Repco last weekend and none of them stocked the item. I am going to call Ford now to find out where to get them from.
This is a really simple job you can get done with a philips head and some patience. Do not pull your cluster apart, it takes a while to get back together and you'll have to get the dials back in the correct position which will REALLY try your patience.
I'll post again what ford have to say about the bulbs.
ayetobee is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2007, 11:41 AM   #3
ayetobee
Starter Motor
 
Join Date: Jan 2007
Posts: 8
Default

if you mean your climate control unit then the same thing goes. I also had them replaced this week and they have Toshiba Xe written on the back of them, I had those replced when the unit was serviced.
ayetobee is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2007, 02:21 PM   #4
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default

ayetobee is right.

also, try wreckers.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2007, 07:46 PM   #5
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

or if you really feel up to it, there is a write up on here somewhere on how to put leds in them instead
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 17-02-2007, 05:04 PM   #6
ayetobee
Starter Motor
 
Join Date: Jan 2007
Posts: 8
Default

bodes-sh has probably the best suggestion considering LED's cannot burn out.

I found the bulbs at ford in the end. Part# ER 10B765 D - they cost around $5 - 6 each.
ayetobee is offline   Reply With Quote Multi-Quote with this Post
Old 17-02-2007, 05:18 PM   #7
ayetobee
Starter Motor
 
Join Date: Jan 2007
Posts: 8
Default

bodes-sh has probably the best suggestion considering LED's cannot burn out.

I found the bulbs at ford in the end. Part# ER 10B765 D - they cost around $5 - 6 each.
ayetobee is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 01:05 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL