|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
24-06-2006, 12:38 PM | #28 | ||
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
The XR6 Cam with a unichip or edit isn't a bad choice for a street auto car at all.
lots of mid range easy driving and yes i have seen them pull mid 140rwkw with good exhaust mods. the XR6 cam on its own just swapped for a stock cam is a bit ordinary worse idle not much more power. Fo a stock ecu car with decent extarctors and exhaust the dev3hl is a good look and it worked for me. As a rough rule of thumb for a falcon six you will have or should have 105rwkw extractors and exhaust will lift that to 115rwkw and most decent cams and I would say Joe at Crescent in Liverpool Sydney CMS stage 2 or Jim Mocks dev3HL are decent and will give 135rwkw or anither 20 WITH stock ecu! Unichip or edit add 10rwkw! |
||