Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 31-10-2020, 02:32 PM   #1
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 48,832
Default Toyota's 4.5L TDV8 blows goats



It's AFF's favorite man, John Cadogan

He has an interesting point here, that Toyota 4.5L V8 diesel is an absolute turd (in as delivered factory trim) with expensive maintenance.

Its an ancient piece of crap, but the clip is interesting as its talks about the differences in losses between bigger engines with numbers.

Interestingly he covers the TT variant of the same engine on the 200 series, its much better.

He's done some calculations outlined below:

Quote:
Here’s a question from a dude named Dave, concerning the King (of mediocrity) - Toyota.

"I'm comparing a Landcruiser Troopie with a new Prado. The Troopie has a V8 with 151kW & 430Nm. The Prado has an inline four-cylinder with 150kW & 500Nm. (Approximately the same power/torque.) But the Troopy uses about 15L/100 compared to the Prado at 10L/100 (both ballpark real world figures, not the ADR fantasies).

"If they output about the same power, where is the big difference in fuel economy coming from? The weight of each car? Aerodynamics? Gearing? Feeding four extra cylinders, with extra engine internal friction?

"If they were the same weight, and had the same Cd value, would they accelerate/overtake the same and have the same fuel usage, even though one is V8 and one an I4?" - David Deere

The data:

Diesel = 45 kJ/g (and if you do that once a second = 45kW)
So, 2.2g/sec = 100kW (of potential heat energy)
Combustion efficiency = 40% = 40kW @ crankshaft
15% loss via transmission = 34kW @ wheels

Prado:
2.755cc
6sp (5th = 0.687:1, 6th = 0.580:1, diff = 3.91:1)
265/65R17 (Circ. = 2.26m)
150kW @ 3400rpm
500Nm @ 1600-2800rpm
Bore x stroke: 92.0 x 103.6mm
ADR economy: 7.9 (combined, L/100km)
Kerb weight: 2325 (GXL)
100km/h = 27.8m/s
= 737 wheel rpm
= 2883 tailshaft rpm
= 1672 engine rpm (6th)
= 1981 engine rpm (5th)
Total swept cylinder area = 120,000 mm^2

Troopie:
5sp (5th = 0.75:1, diff = 3.91:1)
225/95R16 (Circumf = 2.62m)
4.461cc (+62% move volume)
151 @ 3400rpm
430Nm @ 1200-3200rpm
Bore x stroke: 86.0 x 96.0mm
ADR economy: 10.7 (L/100km) - about 35% higher than Prado
Kerb weight 2265kg
100km/h = 27.8m/s
= 636 wheel rpm
= 2487 tailshaft rpm
= 1865 engine rpm (5th) = 11.5% higher than Prado in 6th
Total swept cylinder area = 207,000 mm^2
= 72.5% more area than Prado
** but at 100km/h rpms are also 11.5% higher, so total cylinder wall friction = 81% higher (ballpark)

** Hyundai/Kia 2.2 @ 147 kW & 440 Nm I4
** Mazda 2.2 @ 140 kW & 450 Nm I4

Plus: Troopy needs to drive twice as many valves to do the same job, pumping more oil and water, etc. (Not as volumetrically efficient, and higher pumping losses, etc.)

And the single turbo 4.5 V8 is a rubbish engine - like it’s the cheap, slutty version of the 4.5 TT, which makes 32.5% more peak power, 51% more peak torque and returns slightly better fuel economy - despite being in a platform weighing 500kg more.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
 


Forum Jump


All times are GMT +11. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL