|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
12-03-2014, 08:28 PM | #1 | ||
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
Just bought a 2009 MB Mondeo Zetec Moondust Silver.
It has 123K kms and I know they are a sealed Gbox but I'm still going to replace all fluids and filters as I do that to start as my base after not knowing any history on it (even though it's got a full service history). Has anyone done their 6spd box? any tips? I've researched the Aisin box and noticed how someone in the UK did it with the breather hose or through the drain plug, I actually have suitable tools being a Diesel Mechanic by trade so I'll be trying the fill plug first. I've got the specifics on the fluid spec and don't mind using an alternative of Fords oil. No tans filter was a bit of a surprise to me but I'm not fussed. Also the timing belt when is it due? I'm yet to get the books and go over it but would like to get ahead. any other tip others can give me please do, I'm aware of the rubber hose that perishes (on the exhaust) with heat/age giving a DPF error and will be looking into that too. I fly down to Brissy this Friday morning and am quite excited, then ready for the 1700km drive home to Cairns, can't wait. |
||