|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
14-04-2014, 12:14 AM | #1 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,546
|
Is it normal to lose water level in the overflow tank over time?
TDCI Focus with 75,000km on the clock, my coolant level is just a bit under the minimum indicator. I haven't noticed any leaks inside the car at all, though the other night there was some water in the footwell on the floor mat, but my passenger stepped in a puddle accidentally before she got into the car so I'm guessing its from that. |
||
24-04-2014, 08:08 AM | #2 | ||
Regular Member
Join Date: Jan 2012
Posts: 47
|
Generally you should not be loosing any coolant at all because it is a sealed system. It is a sign that you have a leak. Sometimes the leak is not visible from the top if you just pop the hood up. I have a leak on my focus just after 20,000 kms and I only noticed it when I was changing the oil myself and I was under the car. The red/pink coolant was very visible under the was pump and some of the pulleys from underneath the car but not visible if viewed from the top of the engine.
|
||
This user likes this post: |
23-05-2014, 07:26 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,871
|
If I remember right, the cap seals on o-rings. There have been cases where the bottle distorts and the opening is no longer round so the o-rings don't seal properly. If you can't see any obvious residue from a leak you could consider this.
|
||
This user likes this post: |
21-07-2014, 11:58 AM | #4 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,546
|
At the moment its half way between empty and the minimum mark on the overflow bottle.
|
||
30-09-2014, 05:18 PM | #5 | ||
Regular Member
Join Date: Apr 2009
Posts: 41
|
Just wondering how this turned out.
Was it the heater core leaking or something else? Cheers. |
||
07-10-2014, 04:58 PM | #7 | ||
Regular Member
Join Date: Aug 2014
Posts: 54
|
radiator is one of the common leak points on the Focus mk2 - end caps.
Have the system pressure tested. Last 2 we did were both XR5s @ 60k service.
__________________
Advertising removed. |
||
This user likes this post: |
07-10-2014, 06:10 PM | #8 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
thats low kms to have this sort of problem
very strange .... petrol and diesel engines available .. nice car this artical . writer must not like ford focus .. http://www.whatcar.com/car-news/comm...oblems/1201320 all used an oil cooled turbo if fitted I see if it had a water cooled turbo fitted - I would be looking at the turbo internals
__________________
My car goes Brumm Brumm Last edited by dirty hands; 07-10-2014 at 06:20 PM. |
||
08-10-2014, 12:47 AM | #9 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,546
|
I've pressure tested system, it very slowly loses some pressure, as in over an hour period, very slowly.
|
||
08-10-2014, 11:45 AM | #10 | |||
Regular Member
Join Date: Aug 2014
Posts: 54
|
Quote:
Pressurise the system and inspect all hose connections and the radiator end tanks fully whilst under pressure. If no visible leak is found, pressure test the cap. If that all checks out I would start looking at an internal leak such as head gasket. Never seen a turbo leak coolant internally only at the sealing washers which will give you an external weep/drip during pressure testing.
__________________
Advertising removed. |
|||
08-10-2014, 12:35 PM | #11 | |||
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
Quote:
Perhaps it's losing pressure from the actual testing unit? Set it up again, and if the pressure slowly drops again spray soapy water around the fittings and see if it bubbles up.
__________________
___________________________ I've been around the world a couple of times or maybe more....... |
|||
08-10-2014, 02:39 PM | #12 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
The other less desirable choice is leaking at the water pump Is the pump external or inside the timing chain cover in which case you will need to look at the small drain hole at the bottom of the cover under the pulley to see if there is coolant stains down there
|
||