Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 20-08-2005, 11:17 PM   #1
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default Starting Issues

Twice today I have had to attempt to start the car 3 times. Turn key, hold it, wont start. Turn back to acc, try again, wont start. Turn key right off, try again and it goes.
Just wondering if anyone else has experienced this?

Was a cold day but the car was by no means freezing, the plugs and leads are all around 10,000km old (had new ones put in before i picked it up) and there's no other signs of it running like crap etc etc. I'll be taking it back to the dealership but I think this may be one of those niggly little problems that only ever happens when there isnt service personnel around (i.e. when it can be fixed).

Also whil we're sort of on topic has anybody had experience with aftermarket ignition leads for Focus?

__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 20-08-2005, 11:43 PM   #2
whippet_zetec
Supes
 
whippet_zetec's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 1,063
Default

I think it is a safety mechanism for the Foci that it wont allow you to go stright from accesrories after a non-start to ignition on again.....

same thing happens to me if my Foci doesnt start first time...have to go all the way back to off position and then return to ignition on.

dont stress about it if its a once off.....start to worry when you have to try turning your Foci over a few times before it starts.
__________________
Yes I DO drive a Toyota
whippet_zetec is offline   Reply With Quote Multi-Quote with this Post
Old 20-08-2005, 11:47 PM   #3
zetec
Zoom Zoom
 
zetec's Avatar
 
Join Date: Jan 2005
Location: Melbourne, VIC
Posts: 4,352
Default

not good to hear. melbzetec has magnecor ignition leads on his car i believe. They're definitely aftermarket.
__________________
2012 Mazda3 MPS
zetec is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 12:01 AM   #4
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Yeah, i wouldnt be asking if it was a rare occurence but it has done it twice today and at least 5 times before that.

And when you're parked in the Main St with the bogans going past in their Commos and your shiny clean car isnt starting, its not a good feeling!
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 08:20 AM   #5
melbzetec
Old enough to know better
 
melbzetec's Avatar
 
Join Date: Apr 2005
Location: Melbourne
Posts: 2,311
Default

Yeh I have Magnecor silicon ignition leads. Never had a single problem with them. Never missed a beat. I can't say they make any performance difference. It's just a thing I do........I always replace those serviceable items that car companies can save a few bucks on in manufacture, by putting in premium items. eg leads, air filters, spark plugs.etc. I just think it makes everything run that bit sweeter
__________________
Manual 2003 Machine Silver 5 Door LR Focus Zetec.
Mods: Ford Racing CNC'd cylinder head milled .040", 3 angle valve grind. Ford Racing Stage II camshafts. Ford Racing cam gears. Ford Racing long tube header. Random Technology hi flow cat. Herrod 2.25" stainless cat-back. Pipercross Viper intake. CFM 65mm throttle body. 2000 ported intake manifold. Herrod Custom SCT tune. Eibach suspension. Quaife ATB diff. Wilwood 13" brakes. Custom ST170 leather interior.
www.cardomain.com/ride/2773918

melbzetec is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 08:41 AM   #6
Laminge
Cuban... nothing like it
 
Join Date: Dec 2004
Location: Watching in amusement
Posts: 11,643
Default

Are the keys coded?

Have you tried the spare?
__________________
Quote:
Originally Posted by Laminge
...its amazing how mud sticks to ones shoes, as flies do to the elderly and bottle blondes around fame and fortune...
Laminge is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 10:11 AM   #7
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by melbzetec
Yeh I have Magnecor silicon ignition leads. Never had a single problem with them. Never missed a beat. I can't say they make any performance difference. It's just a thing I do........I always replace those serviceable items that car companies can save a few bucks on in manufacture, by putting in premium items. eg leads, air filters, spark plugs.etc. I just think it makes everything run that bit sweeter
Thats exactly what I think too.

Gary, Ive never used the spare yet and its hard to make it do it. Will only fail if Im parked in a busy spot with lots of people around, or so it seems.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 11:33 AM   #8
Fast Eddie
Motorsport Guru
 
Fast Eddie's Avatar
 
Join Date: Jan 2005
Location: The Blue Mountains, N.S.W.
Posts: 1,682
Default

My '03 Foci has just under 25K on the odometer and has the same problem. Including the automatic choke not operating on start up but when you select reverse it operates but only for a very short time. I've had the E.C.U. re-programmed twice now and the same problems with un-even revs whilst you're driving occuring, which makes me think there is a software problem with the electronic throttle. Are there any T.S.B.'s that can fix these problems??
Fast Eddie is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 06:52 PM   #9
whippet_zetec
Supes
 
whippet_zetec's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 1,063
Default

maybe its an auto issue? I have a manual zetec and cant say I find any ignition problems.
__________________
Yes I DO drive a Toyota
whippet_zetec is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 07:35 PM   #10
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by whippet_zetec
maybe its an auto issue? I have a manual zetec and cant say I find any ignition problems.
Possibly but I dont quite see how the transmission could affect the starting of the car?
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2005, 11:12 PM   #11
zetec
Zoom Zoom
 
zetec's Avatar
 
Join Date: Jan 2005
Location: Melbourne, VIC
Posts: 4,352
Default

Quote:
Originally Posted by Fast Eddie
My '03 Foci has just under 25K on the odometer and has the same problem. Including the automatic choke not operating on start up but when you select reverse it operates but only for a very short time. I've had the E.C.U. re-programmed twice now and the same problems with un-even revs whilst you're driving occuring, which makes me think there is a software problem with the electronic throttle. Are there any T.S.B.'s that can fix these problems??
Electronic throttle? It's a mechanical cable throttle on the LR Focus. What did you mean? (Hello by the way mate!!! :voldar02: )
__________________
2012 Mazda3 MPS
zetec is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2005, 07:21 AM   #12
KJGH
G6E Driver
 
Join Date: Feb 2005
Location: Mount Waverley, Victoria
Posts: 34
Default

Both our manual and auto do it. Seems to occur more when our cars have already been used for the day.
__________________
:hihi: NOW: 2008 FG Ford G6E
:hihi: WAS: 2007 LS Ford Focus XR5 Turbo
KJGH is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2005, 08:40 AM   #13
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

Quote:
Originally Posted by back2thefutura
Possibly but I dont quite see how the transmission could affect the starting of the car?
on that issue, does the car start without the clutch depressed on the manual cars? I know my oldies Hydaggy must have the clutch depressed fully reguardless of the gear postion. Is the Foci the same?

Back onto your trauma, It could be an ecu to inhibitor switch issue?

I have had similiar issues on two of my BA's.. One it turned out as Minge touched on, was an issue with the programmable key, the other was a royal butt muncher, there was a stretched wire in the loom that went to the cluster. It was so tight in the harness that it was beginning to pull the pin out of the loom plug. Very intermittant but the frequency increased but 2 days later and a $600 auto elec bill we isolated the wire causing the problem..
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2005, 09:21 AM   #14
whippet_zetec
Supes
 
whippet_zetec's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 1,063
Default

Quote:
Originally Posted by Racecraft
on that issue, does the car start without the clutch depressed on the manual cars? I know my oldies Hydaggy must have the clutch depressed fully reguardless of the gear postion. Is the Foci the same?

nope, manual Foci does not require the clutch pedal to be depressed to start (although alot more cars these days are now incorporating such).
__________________
Yes I DO drive a Toyota
whippet_zetec is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2005, 10:17 AM   #15
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by KJGH
Both our manual and auto do it. Seems to occur more when our cars have already been used for the day.
Same with me, on Saturday it was after a half hours driving then about 1hr parked.
I'll go see what I can find out today, hopefully there'll be a TSB for it if its common.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2005, 01:31 PM   #16
Fast Eddie
Motorsport Guru
 
Fast Eddie's Avatar
 
Join Date: Jan 2005
Location: The Blue Mountains, N.S.W.
Posts: 1,682
Default

Hi Zetec,

Hope all is well.

Oh, a manual cable throttle! Someone's given me a b**-steer.
Fast Eddie is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2005, 06:29 PM   #17
zetec
Zoom Zoom
 
zetec's Avatar
 
Join Date: Jan 2005
Location: Melbourne, VIC
Posts: 4,352
Default

Quote:
Originally Posted by whippet_zetec
nope, manual Foci does not require the clutch pedal to be depressed to start (although alot more cars these days are now incorporating such).
...easily bypassed too!!!!! Pain in the ****, what if your clutch jams, I think it's silly (despite I'm sure some safety reasons or something) to limit your ability and theoretically increase the chance of something going wrong by adding yet another mechanism... :gren:
__________________
2012 Mazda3 MPS
zetec is offline   Reply With Quote Multi-Quote with this Post
Old 04-09-2005, 10:56 PM   #18
ja-ja-binks
Starter Motor
 
Join Date: Sep 2005
Posts: 1
Default

i recently bought a 2003 lx sedan 2.0 auto and i have noticed the same problem , (thats how i found this forum) it has happened to me after driving home from work (100km 0 twice now when i try to restart car within about 20min to 1/2 hr. my car was parked on sloping driveway ( uphill) not in flat garage. could that have something to do with it?
ja-ja-binks is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2005, 08:40 AM   #19
whippet_zetec
Supes
 
whippet_zetec's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 1,063
Default

has anyone actually had a Ford technician look at this problem yet and was there any offical response as to why it occurs?
__________________
Yes I DO drive a Toyota
whippet_zetec is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2005, 09:57 AM   #20
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

There is a TSB available for it - TSB 69/03 is done to fix this problem and it's basically a flash update deivered via WDS. Im yet to have it done but will be in the near future (just have to find the time to drop the car off).

For anybody who is having this problem, quote that TSB number when asking them to fix it, and ask them to see if your car is suitable for it.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2005, 12:05 PM   #21
WASACL
Phat-Euro
 
WASACL's Avatar
 
Join Date: Jan 2005
Location: Punchbowl BRO!
Posts: 118
Default

Hey... Yours in auto isnt it... Maybe it is something wrong with the Park selection??? Tried starting it for Neutral?

Russ
__________________
Wake up and smell the FOCUS!
WASACL is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2005, 02:27 PM   #22
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by WASACL
Hey... Yours in auto isnt it... Maybe it is something wrong with the Park selection??? Tried starting it for Neutral?

Russ
Russ,

yeah its an auto but its not the gear selection etc that does it.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:14 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL