![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Regular Member
Join Date: Jun 2007
Posts: 214
|
What is the latest model diff that will fit in my ute? I assume a BF2 diff would go in? Is there anything to look out for when doing this swap? I would like to keep the same ratio and LSD
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
You will need a diff from another ute.
Check to make sure the tailshaft flanges on the B series are the same. I think the tailshafts are a 2 piece so they might not be the same. If you want the same ratio and LSD why not look at rebuilding what you have?
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
![]() |
![]() ![]() |
![]() |
#3 | |||
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
They bolt up the same, apart from the way the hand brake cable mounts to the diff. It is nothing a hose clamp can't fix, but then it doesn't work 100%.
I did have previously in my ute the diff from a BA XR6 (open center) and that was the only problem. Cheers
__________________
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: Jun 2007
Posts: 214
|
Thanks guys.
My ute has 210,000 and the diff is very noisy, mainly on deceleration but also noise on accel too. Had a gearbox place check it out and they said "diff has lost all preload, wheel bearings very noisy". If I rebuilt it, would it need new gears? I would keep the ratio it has, as I do alot of highway km's. If I removed the diff assembly from the ute, cleaned it up and took it in to a diff shop, got them to rebuild it (keeping original gears) and re-installed it myself, how much roughly can i expect it to cost? Thanks, mark |
||
![]() |
![]() ![]() |