|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-08-2007, 06:12 PM
|
#1 | ||
|
Banned
Join Date: Feb 2006
Location: Castlemaine, Central Vic
Posts: 264
|
Hi,
Our AU falcon wants to stall in D sometimes. So if i have it in N and slide it into D the revs will drop to about 200rpm and stall sometimes, it doesnt really recover from it aswell. I have cleaned the ISC with no results. I was reading on here that you can test the ISC by disconnected it and runing the car, but it will not start with it disconnected. Car is Factory dual fuel I6 wagon, it is worse when running on gas. Any ideas? |
||
|
|
|
07-08-2007, 06:46 PM
|
#2 | ||
|
around the place
Join Date: Jan 2005
Location: Perth
Posts: 1,769
|
clean out the throttle body as its most likely got a build up of carbon around where the throttle plate sits. Use carby cleaner spray and a rag to do this, hold it open, spray and wipe... do it a few times till the rag comes out relatively clean, and then try start it with the ISC disconnected.
Adjust the idle stop screw so the engine is idling at around 5-700 rpm with the ISC disconnected, then reconnect the ISC
__________________
GPS Tracker for your vehicle - PM me for info |
||
|
|
|
AU stalling problems.
Hybrid Mode