Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 15-07-2007, 06:57 PM   #1
nikos
mezzo forte
 
Join Date: Dec 2006
Location: Geelong
Posts: 306
Default Variable displacement?

Haha this is pretty left field, but just curious:

As the AU motor can shut down cylinders to prevent overheating, theoretically would it be possible to manually control this infrastructure? Just curious as fuel consumption could be greatly reduced on the highway... Perhaps some modding to the ecu could achieve this?

Cheers Nic

nikos is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:00 PM   #2
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

i don't see why you couldn't, but i don't know if i'd like to just go and start shutting cylinders down, i would imagine it would greatly affect the balance of the engine, and i really don't think it would do it much good.....in saying that, i guess someone may have tried it, or be willing to try it
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:04 PM   #3
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default

an easy way to experiment would be to alter the signal from the temp sensor this would make the ECU think there is an over temp situation and start shuting down cylinders without actually overheating the engine if this works you may be able to switch in a bank of resistors till you get the desired effect I for one would be interested in the outcome
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:10 PM   #4
schuldiner
FF.Com.Au Hardcore
 
Join Date: Jun 2007
Location: keysborough, vic
Posts: 504
Default

yeah, sounds plausible, the new chryslers can automatically shut down cylinders onhighway driving right? maybe chrysler forums or something have the info on how its done.
__________________
Everything always works out when you just do whatever you want and don't worry about the consequences.

see my ute here

AU parts for sale
schuldiner is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:29 PM   #5
burnz
VFII SS UTE
 
burnz's Avatar
 
Join Date: Apr 2007
Location: Central Coast
Posts: 6,353
Default

Quote:
Originally Posted by schuldiner
yeah, sounds plausible, the new chryslers can automatically shut down cylinders onhighway driving right? maybe chrysler forums or something have the info on how its done.
chrysler/chev youse D.O.D. displacment on demant
by shuting the fuel and opening the exhaust on the compression stroke.
while cycling the cylinder firing order
__________________
I don't often hear the sound of a screaming LSX.
But when I do, So do the neighbours..
GO SOUTHS
burnz is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:15 PM   #6
onfire
FF.Com.Au Hardcore
 
onfire's Avatar
 
Join Date: Feb 2006
Posts: 1,078
Default

But why would you want to?
onfire is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:19 PM   #7
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by onfire
But why would you want to?
one word: fuel-economy
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:17 PM   #8
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by nikos
Haha this is pretty left field, but just curious:

As the AU motor can shut down cylinders to prevent overheating, theoretically would it be possible to manually control this infrastructure? Just curious as fuel consumption could be greatly reduced on the highway... Perhaps some modding to the ecu could achieve this?

Cheers Nic
cylinder shutdown to prevent overheating? shutting down cylidner would actually not help at all. Fuel in itself is used as a cooling agent, the leaner an engine runs, the hotter it gets. Hence fuel injection cycles increase as water tempereature and/or air intake charge temperatures increase.

Have a look into some of the fuel maps for aftermarket ecus that are around or if u r lucky enough have a look at factory maps, which have an injection phase increase by percentage dependant on air and fuel temperature (aka air temp / water temp correction maps). these correction maps also alter ignition timing, pulling it down.

AUs dont shut down cylinders to prevent overheating.

there are several stages which lead up to an overheating event in an AU:
1: thermo fans both run at full power
2: auto drops back a gear to increase revs and waterflow
3: fuel injection cycle increases
4: dash lights up like a chrismas tree

as for answereing you question of shutting down cylinder, in europe either jeep or audi have implemented cylidner shutdown on some of their V8 engines ... do a google
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:28 PM   #9
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

Quote:
Originally Posted by EvilChief
cylinder shutdown to prevent overheating? shutting down cylidner would actually not help at all. Fuel in itself is used as a cooling agent, the leaner an engine runs, the hotter it gets. Hence fuel injection cycles increase as water tempereature and/or air intake charge temperatures increase.

Have a look into some of the fuel maps for aftermarket ecus that are around or if u r lucky enough have a look at factory maps, which have an injection phase increase by percentage dependant on air and fuel temperature (aka air temp / water temp correction maps). these correction maps also alter ignition timing, pulling it down.

AUs dont shut down cylinders to prevent overheating.

there are several stages which lead up to an overheating event in an AU:
1: thermo fans both run at full power
2: auto drops back a gear to increase revs and waterflow
3: fuel injection cycle increases
4: dash lights up like a chrismas tree

as for answereing you question of shutting down cylinder, in europe either jeep or audi have implemented cylidner shutdown on some of their V8 engines ... do a google
if that's the case, then why did ford promote this when they released the au? it would shut down cylinders one by one till you either got stuck somewhere or you turned the engine off and fixed the problem....in an effort to reduce the effects of overheating. as for the v8's that do it, i'm pretty sure it'll shut down 4 at once, and to be honest, i don't think that shutting down 2 or 3 cylinders would save that much fuel for the power you would lose anyway
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:33 PM   #10
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

Quote:
Originally Posted by bodes-sh
if that's the case, then why did ford promote this when they released the au? it would shut down cylinders one by one till you either got stuck somewhere or you turned the engine off and fixed the problem....in an effort to reduce the effects of overheating. as for the v8's that do it, i'm pretty sure it'll shut down 4 at once, and to be honest, i don't think that shutting down 2 or 3 cylinders would save that much fuel for the power you would lose anyway
as i previously mention fuel is used as a cooling agent in itself, however, if you shut down one cylinder at a time (no matter which) you would kill the overall balance of the engine. ever had your 6cyl misfire on one or two cylinders and feel how rough it runs?

please give me a printout of the manual where it says it shuts down cylinders.
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:52 PM   #11
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

Quote:
Originally Posted by EvilChief
as i previously mention fuel is used as a cooling agent in itself, however, if you shut down one cylinder at a time (no matter which) you would kill the overall balance of the engine. ever had your 6cyl misfire on one or two cylinders and feel how rough it runs?

please give me a printout of the manual where it says it shuts down cylinders.
So fuel is a cooling agent eh? Yeah maybe, but not if it is being ignited to produce power.

The AU sixes DO shut down cylinders if an overheat situation accurs. It shuts them in sequence, not just one particular cylinder, followed by another "ad infinitum" until there are none left firing. So initially it may shut just one cylinder over a number of cylces - if the overheating continues it may then shut two cylinders over a number of cycles. But what I'm saying is that it won't be the same cylinders - it will choose them in (I presume) in a pre-set sequence that has been programmed into the ECU. I don't know at what stage it says I give up and shuts down all cylinders but I would expect that three cylinders would be the limit. A six will actually run reasonably smoothly on three cylinders albeit with very much less power naturally.

But back to the first Q - if you disconnect each alternate plug wire in the firing order and take the car for a drive you will have a bit of an idea how smooth the engine will be and how much power it will loose. After doing this, if you are happy with the result then all you have to do is "switch off" three injectors to get the economy you are chasing - how you do that to an AU ECU is up to some electronics guru to tell you, but I know it could be done easily on the 4.1 litre EFI motors because they batch fired on two banks.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:54 PM   #12
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default

Quote:
Originally Posted by EvilChief
cylinder shutdown to prevent overheating? shutting down cylidner would actually not help at all. Fuel in itself is used as a cooling agent, the leaner an engine runs, the hotter it gets. Hence fuel injection cycles increase as water tempereature and/or air intake charge temperatures increase.

Have a look into some of the fuel maps for aftermarket ecus that are around or if u r lucky enough have a look at factory maps, which have an injection phase increase by percentage dependant on air and fuel temperature (aka air temp / water temp correction maps). these correction maps also alter ignition timing, pulling it down.

AUs dont shut down cylinders to prevent overheating.

there are several stages which lead up to an overheating event in an AU:
1: thermo fans both run at full power
2: auto drops back a gear to increase revs and waterflow
3: fuel injection cycle increases
4: dash lights up like a chrismas tree

as for answereing you question of shutting down cylinder, in europe either jeep or audi have implemented cylidner shutdown on some of their V8 engines ... do a google
it is a well known fact that ford use this method of preventing overheating (shuting down cylinders) and it has been proven to workthe reason being with less gylinders working thos cylinders are no longer producing heat from the combustion process some of the other things you mention also are part of the process though
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:29 PM   #13
nikos
mezzo forte
 
Join Date: Dec 2006
Location: Geelong
Posts: 306
Default

Quote:
AUs dont shut down cylinders to prevent overheating.
Thats not what the manual says.

I'd be most worried about the effects of the resulting unbalanced cooling of the block, as the mode is only used for emergencies, and the manual says only drive to a place where you can fix the overheat problem, no further.
Quote:
But why would you want to?
Save litres on highway!

http://en.wikipedia.org/wiki/Variable_displacement
nikos is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:32 PM   #14
nikos
mezzo forte
 
Join Date: Dec 2006
Location: Geelong
Posts: 306
Default

Quote:
i don't think that shutting down 2 or 3 cylinders would save that much fuel for the power you would lose anyway
Cylinder pressure, 1st parag

http://en.wikipedia.org/wiki/Variable_displacement
nikos is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:38 PM   #15
burnz
VFII SS UTE
 
burnz's Avatar
 
Join Date: Apr 2007
Location: Central Coast
Posts: 6,353
Default

well i remember the peter wherit doing ad's for ford, specificly menshioning
shutting cylinder's incase of overheating
__________________
I don't often hear the sound of a screaming LSX.
But when I do, So do the neighbours..
GO SOUTHS
burnz is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:46 PM   #16
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default

through the scanners we use at work, we cant even shut down cylinders. we can shutdown the entire injection cycle all together, which stalls the engine. my AU manual doesnt mention anything about this and i havent found anything about it in the service manuals at work (thene again i never spefically looked for it). also how does it know which cylinders to shut down. it doesnt have temp sensors for individual cylinders.

other than fuel economy i cant see any benefit of ceising injection to individual cylinders.
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:49 PM   #17
nikos
mezzo forte
 
Join Date: Dec 2006
Location: Geelong
Posts: 306
Default

Quote:
please give me a printout of the manual where it says it shuts down cylinders.
AU1 manual, page 19 under "instrumentation", titled "fail safe cooling"

It says not to run for extended periods of time, just until safe to pull over. It may not even stop the injectors, maybe it just does the spark.

But maybe with some experiment work and ecu mods it could be feasible.
nikos is offline   Reply With Quote Multi-Quote with this Post
Old 16-07-2007, 04:14 PM   #18
DJM83
Barra Turbo > V8
Donating Member3
 
DJM83's Avatar
 
Join Date: Jan 2005
Posts: 26,176
Default

Quote:
Originally Posted by nikos
AU1 manual, page 19 under "instrumentation", titled "fail safe cooling"

It says not to run for extended periods of time, just until safe to pull over. It may not even stop the injectors, maybe it just does the spark.

But maybe with some experiment work and ecu mods it could be feasible.
And as it says in there its only available on AU I6 engines not V8's incase anyone didnt know. But if people are worried about economy, buy a smaller car :
__________________
-2011 XR6 Turbo Ute - Lux Pack - M6
-2022 Hyundai Tucson Highlander Diesel N Line
DJM83 is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 07:52 PM   #19
robbo_yobbo
Kick out tha Jams
 
robbo_yobbo's Avatar
 
Join Date: Mar 2006
Location: SA
Posts: 443
Default

I think your taking a backwards step in shutting down cylinders to save on fuel economy.

The reason more cylinders = more fuel usage, is because theres more moving parts, meaning more friction, meaning more wasted energy. if it werent for friction, you could have an unlimited number of cylinders and not use any more fuel from one car to the next to go the same distance at the same speed, regardless of the total displacement, providing everything else was constant.

Based on that, if you shutdown one or more cylinders, your not reducing the total friction, and therefore will not save any fuel.

Further more, I think you will find you'll actualy go backwards, in that you will still be compressing the air in the shutdown cylinders, but not have the burn to expand it again and provide the power to compensate for the loss.

Reduce heat indeed it will, (someone mentioned that the fuel was a heat reducer so it wouldnt work, but remember, no fuel = no burn = less heat. leaner only means hotter if theres a burn.)

The only way your going to save any fuel economy by shutting down cylinders is if you can stop the inlet and exhaust valves from opening, and stop the piston from moving, which on any of the cars we drive, is not even close to a possibility, the motor would need to be specialy designed for it, and would not work conventionaly at all.
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats!
robbo_yobbo is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 08:00 PM   #20
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

Yes robbo that is exactly correct - you will only save fuel if you can release the compression in the cylinders that are shut down - you only have to open one valve (exhaust) to do this. However on perfectly flat road running, if three cylinders were shut down there would be less fuel used, but not 50% - the reason that you wouldn't save the entire 50% is because of the mass of rotating parts no longer contributing to powering the engine. I can see it would only work in this "perfectly flat road" situation.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 08:11 PM   #21
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

Limp home mode... it does shut down cylinders, ive had this happen to my car.. mind you it was a test to see if it actually does this.
Drained most of the water out of it and took it for a drive, next thing you know the car starts running rough but only after 3000rpm.
Cruising along it was smooth as but sink the boot in and it wasnt running on full 6 cylinders. The more longer I drove the the more it started to run rough.
Mate and I even let it idle while we pulled plug leads off to see if it was sparking on all cylinders which it wasnt. And there was alot of fuel vapour coming out of the exhaust.
Top it back up with coolant, and no problems what so ever, mind you the temp gauge never really went much above half way.
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 16-07-2007, 11:34 PM   #22
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Quote:
Originally Posted by stiddy
Limp home mode... it does shut down cylinders, ive had this happen to my car.. mind you it was a test to see if it actually does this.
Drained most of the water out of it and took it for a drive, next thing you know the car starts running rough but only after 3000rpm.
Cruising along it was smooth as but sink the boot in and it wasnt running on full 6 cylinders. The more longer I drove the the more it started to run rough.
Mate and I even let it idle while we pulled plug leads off to see if it was sparking on all cylinders which it wasnt. And there was alot of fuel vapour coming out of the exhaust.
Top it back up with coolant, and no problems what so ever, mind you the temp gauge never really went much above half way.

Also in an auto ... the EEC puts that into LHM as well ... locks it in 3rd.

Also EGAS doesn't have cylinder shut down .... just the auto goes into LHM ... temp still skyrockets though.

Been there done that ... not fun in Summer heading up hills around Sydney loaded up. Should have that sorted now ... twin core radiator :
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 08:16 PM   #23
nikos
mezzo forte
 
Join Date: Dec 2006
Location: Geelong
Posts: 306
Default

If both valves could be held shut then the "air spring" could be achieved, but this is obviously impossible on a single cam engine.

I wonder if the fuel saving due to increased cylinder pressure (due to more throttle) would overcome the load of dead cylinders on the compression stroke.
nikos is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 08:21 PM   #24
burnz
VFII SS UTE
 
burnz's Avatar
 
Join Date: Apr 2007
Location: Central Coast
Posts: 6,353
Default

Quote:
Originally Posted by nikos
If both valves could be held shut then the "air spring" could be achieved, but this is obviously impossible on a single cam engine.

I wonder if the fuel saving due to increased cylinder pressure (due to more throttle) would overcome the load of dead cylinders on the compression stroke.
that is exactly what the ls2 does
__________________
I don't often hear the sound of a screaming LSX.
But when I do, So do the neighbours..
GO SOUTHS
burnz is offline   Reply With Quote Multi-Quote with this Post
Old 16-07-2007, 03:51 PM   #25
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default

Quote:
Originally Posted by nikos
If both valves could be held shut then the "air spring" could be achieved, but this is obviously impossible on a single cam engine.

I wonder if the fuel saving due to increased cylinder pressure (due to more throttle) would overcome the load of dead cylinders on the compression stroke.
you could get the air spring to work on a single can it would be a matter of having either an electrical or hydraulic acctuator on the rocker arm when not activated it would cause the rocker to be too short to push the valve
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 17-07-2007, 11:33 AM   #26
robbo_yobbo
Kick out tha Jams
 
robbo_yobbo's Avatar
 
Join Date: Mar 2006
Location: SA
Posts: 443
Default

Quote:
Originally Posted by au3xr6
you could get the air spring to work on a single can it would be a matter of having either an electrical or hydraulic acctuator on the rocker arm when not activated it would cause the rocker to be too short to push the valve
This would be extroadinarily difficult (and from an economic viewpoint - pure stupidity) to modify an existing au head to do this. but just so no-one goes out to try it by just doing the above only (not that I think anyone will due to the difficulty on its own)

you would need to.....
-kill the injector to the "dead" cylinder
-kill the spark so your not wasting the energy your attempting to save trying to ignite air
-either open the exhaust valve on the compression stroke, or close the intake valve on the intake stroke (possibly using the method in the above quote) to create what the wikipedia artical refers to as an "air spring"
-create a way to control the timing of it all.
-alternate the "dead" cylinders appropriateley so that your not causing the same cylinder/s to be continualy shutdown creating unecessary vibration or strain.

the length of time that the ignition, fuel and valve status is altered for would have to be very accurate and rpm dependent.

If it were me (which I can say it never will be) I would look at controling timing on injector pulses......ie....
assuming cylinders fired in the order 123456 on an I6 (which I know they dont)..... when the impulse is given to injector 1, power and ignition is killed to cylinder 2 and the valve status altered (sidenote -weather that be both valves closed or both valves open makes no real difference IMO, probably both valves closed woul save a miniscule amount of energy and prevent exhaust from going backwards into the plenum and being sucked into another cylinder so while not likeley may be the better option) injector, ignition and valve status of cylinder 2 remains altered untill cylinder 3 recieves an injector pulse and then injector 2 returns to normal operation for the next 2 cycles.

next kill cylinder 5 in the same method, then 3, then 6, then 4, then 1, and then repeat from the top AFTER cylinder 2 has fired normaly again so that your not killing 2 ajacent cylinders in a row - or something similar.
This method would see 4 opperational cylinders

or kill 246 on 1 cycle and 123 on the second for the next cycle

Now I havnt put any thought into this or paid attention to detail, and its likeley that the "dead" cylinders status would have to be killed before the preceeding injector fires, and would need to remain killed after the following injector fires, but you get the jist.
Point is, id idvise anyone not to even bother contemplating the idea!

Nothing is impossible, but it appears the only reason anyone would want to do this is to save money on fuel economy, but the cost and time involved with setup and exmerimentation would far outweigh any economic gains (if any) to be had. :togo:
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats!
robbo_yobbo is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2007, 12:42 AM   #27
burnz
VFII SS UTE
 
burnz's Avatar
 
Join Date: Apr 2007
Location: Central Coast
Posts: 6,353
Default

Quote:
Originally Posted by robbo_yobbo
or kill 246 on 1 cycle and 123 on the second for the next cycle:togo:
should't it be 153,
624.
__________________
I don't often hear the sound of a screaming LSX.
But when I do, So do the neighbours..
GO SOUTHS
burnz is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2007, 12:48 PM   #28
robbo_yobbo
Kick out tha Jams
 
robbo_yobbo's Avatar
 
Join Date: Mar 2006
Location: SA
Posts: 443
Default

Quote:
Originally Posted by burnz
should't it be 153,
624.
after re-reading, i actualy meant to type 246-135, but screwed it up in my haste.

but even still, I have no idea, so your probaly right, I was just giving random examples based on a firing sequence of 123456, the only point implied in my post was to alternate the shutdown cycle, and wasnt based on the actual firing sequence of the I6 (because I dont actualy know what actual the firing sequence is).

if however (based on 123456 firing sequence) you killed in the order 153-624, you would still only net 2 dead cylinders instead of the 3 obtained by a kill secuence of 135-246 because the following would happen....

if killing in the order of 153246
miss,2,3,4,miss,6,1,2,miss,4,5,6,1,miss,3,miss,5,m iss etc
this results in 6 misses over 18 intended fires (3 revolutions), which shutsdown a net of 2 cylinders per rev.

if killing in the order of 246-135
1,miss,3,miss,5,miss,miss,2,miss,4,miss,6 etc
this results in 6 miss's over 2 revolutions, netting 3 dead cylinders per rev.

If anyone is brave enough to attempt it themselves, and has enough time and money to throw away, the finer details like this are something you should already know anyway.
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats!
robbo_yobbo is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 08:18 PM   #29
nikos
mezzo forte
 
Join Date: Dec 2006
Location: Geelong
Posts: 306
Default

Quote:
And there was alot of fuel vapour coming out of the exhaust.
It just cuts the spark then, I guess the unburnt fuel helps cool the cylinders
nikos is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2007, 08:24 PM   #30
robbo_yobbo
Kick out tha Jams
 
robbo_yobbo's Avatar
 
Join Date: Mar 2006
Location: SA
Posts: 443
Default

I think you will find the following to be true.....
These figures are pureley example figures, Im not even going to attempt for them to be acurate, thier just to keep the numbers easy.

example a)...normal cruising....
an 8.0L (massive!) 8 cylinder car is cruising down the highway at 100km per hour.
To maintain speed, the car is on 1/2 throttle, compressing 1/2 a litre of air per cylinder per revolution (4L of compressed air all up) and 50millilitres of petrol per cylinder, per revolution (400mL total per revolution).

Now for arguments sake, lets say that for every 400mL's of fuel burned at an AFR of 1:10 it produces 1megajoul of power. any less than 1 megajoul results in the car decellerating.

The reason we need to burn this fuel to maintain speed is to do the following.....
overcome road/tyre friction
overcome driveline friction
recharge battery and run other electric items
overcome wind resistance
overcome friction on moving parts on the motor
we need to squeeze the air before we can burn it (true if we can get away with squeezing less air, we can save energy)

example B.....1 bank of cylinders shutdown on the same car cruising at the same speed.

To maintain speed with 1 bank of 4 cylinders shutdown, this is what would happen (even with the exhaust valve of the shutdown cylinders open)

First of all, if we could open the exhaust port during the compression stroke (which we cant on a falcon) we would save the energy it takes to compress the air on 4 cylinders.
But then we would loose that energy on the other cylinders. why?????........
Remember, to maintain 100km/h we need to produce 1 megajoul to overcome the resistance, or we need to reduce the resistance.
To produce that 1 megajoul, we could no longer run on half throttle with 1 bank not burning. we would need to open to full throttle which would mean that now the 4 running cylinders are compressing 1L of air each instead of .5L - the total compressed air is still 4L per cycle and the energy it takes to overcome this resistance is the same as in example a.
now we still need to keep our AFR at 10:1, so now instead of 50mL of fuel per cylinder its 100mL x4 for a total identical 400mL.

You can see here that we're not saving on fuel at all. all we do is make the other 4 cylinders work harder to do the same job, reduce the total available power, increase engine stress, increase heat in the running bank, wich would actualy result in a reduction of power, or an increas of fuel consumption to keep the RPM the same.

The only way to increase the economy by shutting down cylinders, is to stop all asociated moving parts from moving - therefore reducing the total resistance. Even doing this, your not going to be able to get an 8 cylinder car to run on 4 cylinders as economicaly as a 4cy because of the increased weight, so my point of view is that this avenue is to an extent like flogging a dead horse.

I know that sounded like a physics/chemistry lesson, but I figured that was the simplest way to put it. I hope it was easy to follow
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats!

Last edited by robbo_yobbo; 15-07-2007 at 08:30 PM.
robbo_yobbo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:10 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL