Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 17-11-2008, 06:21 PM   #1
Tj-zetec
Knows nothing. Apparently
 
Tj-zetec's Avatar
 
Join Date: Aug 2007
Location: On the front steps, Brown-baggin' it.
Posts: 517
Default A few minor engine issues (zetec)

I've found over the last few weeks the old girl is a little rough on cold starts. Even on hot days.
Mostly rough, lumpy idle but i can't quite tell if it's missing. It's only at idle though, given some throttle it behaves itself.

And just recently it's developed a bit of a flat spot at low rpm and doesn't really pull until the revs get up around 3-3500 rpm.

It's due for a service, which i usually do myself but obviously i can really only change fluids and filters.
Is it worth, after servicing it, taking it somewhere that does computer tuning and diagnostics?? there's a place up the road from me that i hear good things about but i wanted your opinions first.

__________________
2008 Electric Orange LV XR5. With dreamscience strategem SCT, K&N 57i Gen2 cold air intake for more fun and demonic vaccum cleaner noise!!

1975 Mitsubishi/Chrysler GC Galant 2-door Hardtop. 4G63 DOHC heart transplant nearly complete!
Check out the build over here
Tj-zetec is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2008, 06:30 PM   #2
BlackLS
yum
 
Join Date: Jan 2005
Posts: 1,417
Default

Have you replaced a fuel pump yet?

How many K's has it does.

May also be an oxygen sensor.
__________________
2005 LS Focus LX
Nov05 | Manual | Black Sapphire
250,000kms.

BlackLS is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2008, 07:04 PM   #3
Tj-zetec
Knows nothing. Apparently
 
Tj-zetec's Avatar
 
Join Date: Aug 2007
Location: On the front steps, Brown-baggin' it.
Posts: 517
Default

just on 140,000.

No i haven't done a fuel pump. it's only at idle where it had problems, wouldn't a pump affect engine uptake at any revs??
It doesn't seem to starve for fuel, just runs lumpy
__________________
2008 Electric Orange LV XR5. With dreamscience strategem SCT, K&N 57i Gen2 cold air intake for more fun and demonic vaccum cleaner noise!!

1975 Mitsubishi/Chrysler GC Galant 2-door Hardtop. 4G63 DOHC heart transplant nearly complete!
Check out the build over here
Tj-zetec is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2008, 08:51 PM   #4
Mullett
Badly Focused
 
Mullett's Avatar
 
Join Date: Jul 2008
Posts: 487
Default

Start from the top:

New sparkplugs
New fuel filter
New air filter

Then:
Coilpacks
Fuel Pressure reg
Catalytic converter
Crank angle sensor

Computer diagnostics is a pretty loose term, but if they've got the right gear they'll be able to tell you if something's stuffed. I'd suggest a dyno tune (if someone in your area can do them). You'll get more power/economy and it'll tell you straight out if there's a problem with your Air Fuel Ratio (which is quite likely what's causing the flatspot).

-RM
__________________
07 LT CL, CAI, timing, XR5 springs, LS Zetec wheels
16.045...0.05 of a second! I wanted a 15sec pass!

93 GSR/Evo3...too much to mention, 12.2sec 1/4, FOR SALE!

*Maybe we don't try putting holes in things that sink, yeah?*
Mullett is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2008, 01:53 PM   #5
Fast Eddie
Motorsport Guru
 
Fast Eddie's Avatar
 
Join Date: Jan 2005
Location: The Blue Mountains, N.S.W.
Posts: 1,682
Default

Quote: "Doesn't really pull until the revs get up around 3-3,500 rpm" Ha, that's a familiar feeling and its something that doesn't worry me but mine's an auto though.

I can recommend someone who can dyno your Focus. P.M. if you like and I can find out for sure whether they'd be willing to help you out. Might even put my LR on the dyno too.

Can you recall if you'd had "E.C.U. Edits" programmed into it within the first year or so of ownership?
__________________
Interior Enhancements: Footwell Lighting, Brushed Alum. H/brake Handle, 6 Disc In-Dash System.

Exterior Enhancements: ST170 Wheels, Richbrook Shorty Aerial, Euro-Spec Hatch Handle.

Performance Enhancements: Ate Callipers/EBC Rotors/EBC Greens Stuff Pads, ST170 Suspension, Herrod's Custom Tune, Ford Racing Coated Exhaust Manifold & Bespoke 2.25in Exhaust.

Awards: AFD '07 EFOC Best Focus, SFS '09 EFOC Best Focus, SFS '10 RSOC O/all Best Focus, AFD '10 CFC O/all Best Focus.
Fast Eddie is offline   Reply With Quote Multi-Quote with this Post
Old 19-11-2008, 04:33 PM   #6
eXtremist
2007 Ford Focus Zetec
 
eXtremist's Avatar
 
Join Date: Nov 2006
Location: Sydney, Australia
Posts: 431
Exclamation

Run some "Subaru Upper Engine Cleaner" through your engine.

Its said to be the best upper engine cleaner when compared to things like carby cleaner etc..
eXtremist is offline   Reply With Quote Multi-Quote with this Post
Old 19-11-2008, 06:27 PM   #7
Tj-zetec
Knows nothing. Apparently
 
Tj-zetec's Avatar
 
Join Date: Aug 2007
Location: On the front steps, Brown-baggin' it.
Posts: 517
Default

hmm interesting.
It had platinum plugs go in about a year ago, maybe 15000 ks.
I've got a k+n filter which is in desperate need of a clean but it's too cold and damp to do it when i get home from work so i'll hit that on the weekend otherwise it'll never dry.
I did, however pick the dead bugs and wipe some of the grime off it and turned it around (it gets real grubby on the side where the snorkel enters the air-box) and that seemed to help.

It'll get new filters and fluids soon.
the upper engine cleaner sounds interesting. what is it, an additive or a flush of some sort.

edit* oh and it had better not be the cat converter, otherwise lambros at HiTech is gonna get a nasty phone call.. hehe.
__________________
2008 Electric Orange LV XR5. With dreamscience strategem SCT, K&N 57i Gen2 cold air intake for more fun and demonic vaccum cleaner noise!!

1975 Mitsubishi/Chrysler GC Galant 2-door Hardtop. 4G63 DOHC heart transplant nearly complete!
Check out the build over here
Tj-zetec is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 11:14 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL