Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

View Poll Results: Park manual car in neutral or gear?
Gear 144 75.39%
Neutral 47 24.61%
Voters: 191. You may not vote on this poll

Closed Thread
 
Thread Tools Display Modes
Old 01-09-2008, 10:59 PM   #1
Shounak
Guest
 
Posts: n/a
Default Park in gear or neutral

This is only really applicable to manual drivers.

I've never understood why anyone would park their car in neutral. Would these people ever park an auto in neutral? Why would you when you've got Park which will actually hold it.

The only semi decent explanation I've heard for this is that it stops you from jumping forward if you start it in gear. I'm on the belief that you should always start with your foot on the clutch.

If you're in neutral, good, you're all set to put it in in 1st or reverse. If you're in gear, you've saved your front bar. Some new cars even have it so you need to have the clutch in whenever you start, even if you're in neutral.

One other explanation had to do with damage potentially caused to an engine if the car turns itself over. WTF. So turning half a revolution will damage the engine but turning at 3000 revolutions per minute won't?

Why be reliant on just a piece of wire holding 2 tonnes of metal in place when you can effectively lock in place?

--
edit: I've had one good explanation which I saw in the flesh. In Thailand they park in neutral without handbrake, regardlress of tranny. It's so cars can be shuffled about.

Try get out of a parallel spot with 1cm on either side, whilst triple parked in, without pushing a few cars out of the way.

So Thai's are excepted.

 
Old 01-09-2008, 11:15 PM   #2
Airmon
King of the Fairy's.
 
Airmon's Avatar
 
Join Date: Jan 2007
Location: CeeeeeTown.
Posts: 5,093
Default

My car doesn't weigh 2 tons, I usually park in Car parks (Flat areas), and always leave the car in Neutral with the handbrake on, The handbrake does the job, and I have no fear of the car flying away.

If i'm parked on an incline then yes I will park it in gear.

I have a habit of starting the car while I'm outside of it so neutral works.

I park my Auto in the driveway in Neutral on occasion and it doesn't bother me. Its a flat area and I dont see any chance of it moving.
__________________
www.bseries.com.au/airmon
They say less talk more action,
I say more torque less traction!
Airmon is offline  
Old 01-09-2008, 11:20 PM   #3
Shounak
Guest
 
Posts: n/a
Default

Why park an auto in neutral though? You've got park which truly does a better job, with no real downside (unless two extra notches on the T bar urines you off).

I still don't understand, it's extra protection at no extra cost but a huge amount of benefit.

I do understand if you have remote start, but I honestly don't get why if you don't have a remote start.

Can anyone sell this to me?
 
Old 01-09-2008, 11:24 PM   #4
Joey_Falcon
Powered By Ford
 
Joey_Falcon's Avatar
 
Join Date: Mar 2008
Location: Newcastle
Posts: 213
Default auto

I drive an auto and I almost always park in neutral. Only time I actually shift it to park is when Im on a moderate to steep hill or if Im in a neighborhood where I want extra security.

Why? Its a habbit now, but my ba had a loose handbrake. When comming to stop to park I would; bring the car to a stop with my foot brake, Put it in nuetral and pull up the handbrake, let my foot off the brake, let the car rock a little (the difference between the foot brake to hand brake) and then put it in park. (most of the time I just leave it in neutral becouse im lazy)

Why? If I just came to a stop, put it straight in park then pull up hand brake then let off footbrake, the car would rock whilst in park, the next time I would jump in to drive it would go CLUNK into reverse.

So in summary I do this to save my auto transmittion.

I hope you all were able to understand what I wrote.
Joey_Falcon is offline  
Old 01-09-2008, 11:30 PM   #5
Shounak
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Bunyip_Chaser
I drive an auto and I almost always park in neutral. Only time I actually shift it to park is when Im on a moderate to steep hill or if Im in a neighborhood where I want extra security.

Why? Its a habbit now, but my ba had a loose handbrake. When comming to stop to park I would; bring the car to a stop with my foot brake, Put it in nuetral and pull up the handbrake, let my foot off the brake, let the car rock a little (the difference between the foot brake to hand brake) and then put it in park.
Why? If I just came to a stop, put it straight in park then pull up hand brake then let off footbrake, the car would rock whilst in park, the next time I would jump in to drive it would go CLUNK into reverse.

So in summary I do this to save my auto transmittion.

I hope you all were able to understand what I wrote.
Believe it or not, I actually wasn't.

First you said you park your auto in neutral.

Then you go onto say, that your parking process involves putting it in neutral for a second and then putting it in park?

Or do you only do this process on hills?

How does parking an auto in park harm your transmission? That's what I really want to know.
 
Old 01-09-2008, 11:42 PM   #6
Joey_Falcon
Powered By Ford
 
Joey_Falcon's Avatar
 
Join Date: Mar 2008
Location: Newcastle
Posts: 213
Default

Quote:
Originally Posted by Shounak
Believe it or not, I actually wasn't.

First you said you park your auto in neutral.

Then you go onto say, that your parking process involves putting it in neutral for a second and then putting it in park?

Or do you only do this process on hills?

How does parking an auto in park harm your transmission? That's what I really want to know.
I do use park on hills. I added to my original post, I think you missed it when quoting it, - I rarely put it in park becouse Im lazy, It saves me 1 step in my parking process.

It harms the tranny by CLUNKING from park to reverse. How much harm I do not know - if any - but it is not a nice feeling.
Joey_Falcon is offline  
Old 01-09-2008, 11:53 PM   #7
Shounak
Guest
 
Posts: n/a
Default

Shifting a car from Park to Reverse/Drive really does damage? Maybe it'll reduce the life of the auto from 500,000km to 400,000km?

You're too lazy to shift from Park to Reverse, but you're willing to shift from Neutral to Reverse? Lol, am I missing something here?

The point of parking the car in gear on flat ground is that it's safe. If the handbrake lets go, isn't 100% adjusted (which isn't uncommon) the car won't move. You have two safety measures instead of one at no extra cost.

For the people who say it protects the auto, mounts. It just feels like trying to warm up your house by turning the lights on.
 
Old 01-09-2008, 11:36 PM   #8
azaxr8
Regular Member
 
Join Date: May 2008
Posts: 294
Default

if u let it bounce a bit it takes pressure off it making it easier to put it into reverse fom park and making no clunk what so ever, if its on a angle. It might not have a effect on the gearbox but the smoothness sure makes it feel alot better.
azaxr8 is offline  
Old 01-09-2008, 11:37 PM   #9
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

well even parking an auto in park still partly stresses the driveline. i don't know if you've ever driven an auto, but as said above, if you just put it in park, then when you go back into gear it makes a wonderful clunk that is felt through the whole car. not to mention engine and gearbox mounts, especially when parked on bigger hills... then again, i guess this applies to manuals too
bodes-sh is offline  
Old 01-09-2008, 11:52 PM   #10
xy500
Constant annoyance
 
Join Date: Apr 2007
Location: Japan
Posts: 567
Default

i'm no expert, but from my experience with automatics i'm 99% sure that when you put the car in park, a pin is inserted into something (a gear or something directly connected to the output shaft) in order to stop the tail shaft turning.
I'm positive that when you take your car out of park whilst there has been some load on it, the clunk is simply the pin being pulled out of its lock position just like a steering column lock.
so this clunk pretty much shouldn't have any noticeable effects on your driveline or engine, as its simply a little recoil while the pin is removed, doubtful that little recoil would do anything like that of a 'd drop'.
i found all this out as my brother broke his park pin in his auto trans, thats what happens when you put your car in park at speed! the rest of the box was fine, but that little 3/8ths pin was snapped!

btw all you boys who park their car in neutral, you would fail a driving test these days because of that, you're putting others at risk for when your park break fails or wears out (which they do quite quickly from stretching) and your car rolls into something or someone, i've seen it happen and it doesn't take much of an incline at all for a tonne and a half hunk of steel to do some serious damage, a friend of myne was even run over by his own car while attempting to stop his rolling away (parked in neutral) vehicle. i'd consider this even more dangerous than some drivers, as when it happens it is silent and happens when people don't expect it.
People have died because of this, and thats why there's laws stating that your handbrake should be adjusted (3 clicks is it? to hold it in place on a hill?) and the car should be in first or reverse if manual or park if auto.

if its on your property fair enough, but have a thought for the others in public places next time.
xy500 is offline  
Old 01-09-2008, 11:42 PM   #11
Suicidal Goldfish
Starter Motor
 
Join Date: Aug 2007
Posts: 27
Default

Because that piece of wire is connected to the handbrake which locks the two back wheels preventing them from spinning? Yknow, just a thought there :P

In all seriousness I do it because I often forget to put my foot on the clutch when I start and dont want to be lunging forward or backwards into something expensive. I do however put my car in 1st or reverse if I'm parked on a hill. Just added piece of mind and security. But tell me what the point of it is if the car is parked on flat ground?
Suicidal Goldfish is offline  
Old 02-09-2008, 01:10 AM   #12
ebxr8240
Performance moderator
 
ebxr8240's Avatar
 
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical advice. 
Default

I often drive trucks .. You MUST park them in gear and air brakes on..
You wouldn't pass a drivers test if you didn't..
If you or your car had an accident and it was found that it wasn't in gear..
Knowing what insurance companies are these days ??
Besides automatics are supposed to take slight stress..
We drive fleet vehicle that get treated very badly and up to 160,000 klrs there's been hardly any auto issues..You can still start an engine by remote if in park position..
I find pulling hand brake on hard enough prevents anyone driving while handbrake is on.. You should pull auto out of park BEFORE releasing handbrake also..
If handbrake does creep on auto? Then the handbrake needs some attention !!
Besides this thread was about manuals..
Should be left in gear...
__________________
Real cars are not driven by front wheels,real cars lift them!!...
BABYS ARE BOTTLE FED, REAL MEN GET BLOWN.
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
Dart 330ci block turbo black pearl EBXR8 482 rwkw..
Daily driver GTE FG..
Projects http://www.fordforums.com.au/showthread.php?t=107711
http://www.fordforums.com.au/showthr...8+turbo&page=4
ebxr8240 is offline  
Old 02-09-2008, 07:10 AM   #13
Trevor 57
FF.Com.Au Hardcore
 
Trevor 57's Avatar
 
Join Date: Mar 2005
Posts: 7,767
Default

Quote:
Originally Posted by ebxr8240
I often drive trucks .. You MUST park them in gear and air brakes on.....
Parking a truck is very different to parking a car.

The reason behind a "diesel" not being parked in gear is because in the old days 'maxi' brakes weren't around and if the air released, the truck would roll away and sometimes these old bangers would jump start themselves.

Not parking a truck in gear these days is a lot about air shifts on gearboxes and clutches.

Maxi/Spring brakes are a fail safe system, they lock the brakes when air is lost or dumped (e.g. when you put the park brake on, there is a dump of air)

Truck brake boosters are in 2 parts, the bit closest to the axle is a booster for the brakes, the bit furtherest from the axle is a 'maxi' or 'spring' brake.

__________________
I reserve the right to arm bears
Trevor 57 is offline  
Old 02-09-2008, 06:38 AM   #14
OLDFORDNUT
FF.Com.Au Hardcore
 
OLDFORDNUT's Avatar
 
Join Date: May 2005
Posts: 3,150
Default

some of these neutral comments are downright scary,
makes you wonder if they should be on the road with the rest of us.
__________________
Hervey Bay QLD
Great trades recently- GILMORE
BOSSYONBIKE
OLDFORDNUT is offline  
Old 02-09-2008, 06:56 AM   #15
Trevor 57
FF.Com.Au Hardcore
 
Trevor 57's Avatar
 
Join Date: Mar 2005
Posts: 7,767
Default

I will comment from my perspective as a long time driver trainer:

For a manual (when parking) the process should be:
Stop, car in neutral, park brake on, release foot brake to ensure park brake is holding, key off/out, then select 1st or reverse gear, get out.


For a automatic (when parking) the process should be:
Stop, car in neutral, park brake on, release foot brake to ensure park brake is holding, key off/out, then select park.
(you shouldn't park an auto in 'park', if you do this, you will notice that sometimes it is difficult to release from 'park', that is because you have loaded up the locking mechanism in the auto, and these are known to brake)
__________________
I reserve the right to arm bears
Trevor 57 is offline  
Old 02-09-2008, 08:05 AM   #16
DBourne
FF.Com.Au Hardcore
 
DBourne's Avatar
 
Join Date: Mar 2007
Location: sydney.nsw.au
Posts: 6,119
Default

just depends, mostly i put it in either 1st gear or if im facing downhill i put it in reverse. if its flat and i wont be long i leave it in neutral
__________________
flickr
DBourne is offline  
Old 02-09-2008, 08:24 AM   #17
gz1
FF.Com.Au Hardcore
 
gz1's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 1,296
Default

Well on both territorys I've owned the handbrake was no more than decoration anyhow, so you have to park it park
gz1 is offline  
Old 02-09-2008, 08:55 AM   #18
bathurst77
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Posts: 1,098
Default

I actually had a car roll across a car park and into my 3 week old el falcon many years ago.
The other driver was in the hand brake on - in neutral habit, and didnt notcie the hill or didnt think. habits are habits.
The incline didnt seem much, but by time it reached my car it did a lot of damage!

Now imagine if a little kid or something had of been standing there, not looking for a silent car?

Sometimes hills arent noticable and it might look flat at a quick glance (or do you check with a level?)
PARK IT IN GEAR IDIOTS!
Get in the habit of ALWAYS doing it!

Too LAZY? what else you too lazy to do, seat belts? indicate? check your mirrors? stop at stop signs etc? driving is not about being lazy. its about being as safe as possible. If u got a safetly item.. USE IT!

Save wear on your gears? as someone said yeh from 500,000 to 499,999 (gee maybe it will last a few more minutes) Why not put bricks under the wheels or park it pushed into walls, save your brakes? hook ahorse to teh front save yor engine..

Actually do me a favour and dont get in your car at all. Save your whole car.. and mine!
bathurst77 is offline  
Old 02-09-2008, 10:28 PM   #19
FTe342
FF.Com.Au Hardcore
 
FTe342's Avatar
 
Join Date: Dec 2004
Location: Newcastle NSW
Posts: 7,890
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by bathurst77
I actually had a car roll across a car park and into my 3 week old el falcon many years ago.
The other driver was in the hand brake on - in neutral habit, and didnt notcie the hill or didnt think. habits are habits.
The incline didnt seem much, but by time it reached my car it did a lot of damage!

Now imagine if a little kid or something had of been standing there, not looking for a silent car?

Sometimes hills arent noticable and it might look flat at a quick glance (or do you check with a level?)
PARK IT IN GEAR IDIOTS!
Get in the habit of ALWAYS doing it!

Too LAZY? what else you too lazy to do, seat belts? indicate? check your mirrors? stop at stop signs etc? driving is not about being lazy. its about being as safe as possible. If u got a safetly item.. USE IT!

Save wear on your gears? as someone said yeh from 500,000 to 499,999 (gee maybe it will last a few more minutes) Why not put bricks under the wheels or park it pushed into walls, save your brakes? hook ahorse to teh front save yor engine..

Actually do me a favour and dont get in your car at all. Save your whole car.. and mine!
This is one of the best posts I have seen on this forum. Well done!

And to some of the moderators who posted in this thread and questioned its relevance whilst contributing nothing - one has to wonder about why you hold the position. You should be promoting/supporting safety which is exactly what this thread is about.
__________________
T3 TL50 #147 Silhouette Auto ESS - Brembos - Last of 3 in T3 spec, only AUIII TL50 ever built -14.2 sec @ 98mph bog stock. Only customer ordered T3 TL50 built, only LWB sedan plated AUIII and the last performance enhanced LWB sedan built by Ford Aust.

AUII Fairlane Ghia Sportsman 5.0L in Blue Pearl

OWN THE ROAD
FTe342 is offline  
Old 02-09-2008, 11:18 PM   #20
Airmon
King of the Fairy's.
 
Airmon's Avatar
 
Join Date: Jan 2007
Location: CeeeeeTown.
Posts: 5,093
Default

Quote:
Originally Posted by shaynet
This is one of the best posts I have seen on this forum. Well done!

And to some of the moderators who posted in this thread and questioned its relevance whilst contributing nothing - one has to wonder about why you hold the position. You should be promoting/supporting safety which is exactly what this thread is about.
I would think that the Moderators should be weeding out useless threads/posts/users and making sure the sites T&C are uphelp. If they should be supporting anything it should be Ford related threads for Enthusiasts, because that's what this site is. I'm sure there is a Safety forum somewhere where everyone gathers to discuss the latest in Hi-Vis, and the Mods there should probably promote it, but that isn't here.
__________________
www.bseries.com.au/airmon
They say less talk more action,
I say more torque less traction!
Airmon is offline  
Old 02-09-2008, 11:27 PM   #21
xy500
Constant annoyance
 
Join Date: Apr 2007
Location: Japan
Posts: 567
Default

Quote:
Originally Posted by Airmon
I would think that the Moderators should be weeding out useless threads/posts/users and making sure the sites T&C are uphelp. If they should be supporting anything it should be Ford related threads for Enthusiasts, because that's what this site is. I'm sure there is a Safety forum somewhere where everyone gathers to discuss the latest in Hi-Vis, and the Mods there should probably promote it, but that isn't here.
Safety is a major issue in any driving, even more so for enthusiasts.
i'm sure cams or andra talk about safety all the time so why can't we discuss it? no-ones making you read it

i say anything that promotes a more positive image for car enthusiasts the better, that way we're not associated with 'hoons' the new scapegoat for societies problems.
xy500 is offline  
Old 02-09-2008, 11:45 PM   #22
Airmon
King of the Fairy's.
 
Airmon's Avatar
 
Join Date: Jan 2007
Location: CeeeeeTown.
Posts: 5,093
Default

Quote:
Originally Posted by xy500
Safety is a major issue in any driving, even more so for enthusiasts.
i'm sure cams or andra talk about safety all the time so why can't we discuss it? no-ones making you read it

i say anything that promotes a more positive image for car enthusiasts the better, that way we're not associated with 'hoons' the new scapegoat for societies problems.
I'm not trying to insinuate that Safety is not important or that it has no place on a car forum. I'm simply saying that it is not the Moderators jobs to promote safety, that's not to say they cant, but they should not be judged are inadequate of their position because they don't.
__________________
www.bseries.com.au/airmon
They say less talk more action,
I say more torque less traction!
Airmon is offline  
Old 03-09-2008, 12:49 PM   #23
Silver Ghia
Moderator
Donating Member3
 
Silver Ghia's Avatar
 
Join Date: Jun 2006
Location: Foothills of the Macedon Ranges
Posts: 18,604
Technical Contributor: For members who share their technical expertise. - Issue reason: As Silver Ghia his contributions to the AU and BA technical areas have been of high quality and valuable to the member base. 
Default

Quote:
Originally Posted by Big Trev
I am so over this thread, and as they say in the classics,

"and it's goodbye from me"
Me too.

Quote:
Originally Posted by bathurst77
Now imagine if a little kid or something had of been standing there, not looking for a silent car?
Ah ha! This is a good reason to ban hybrids.

Probably the only thing worthwhile in this thread I've discovered. Apart from the fact there are drivers around with different ideas on things, and some continuing on with their firm thoughts regardless of what advice and reasoning is given from well experienced and qualified drivers.
Silver Ghia is offline  
Old 02-09-2008, 09:20 AM   #24
outback_chick
*CHIXUTE*
 
outback_chick's Avatar
 
Join Date: Jul 2008
Location: Where I park it..
Posts: 338
Default

Wow... well what a topic...
my first car was a manual and I was taught on a manual.. I was always taught the first thing you do when you get into the car is put your clutch down then check the gear stick... once in neutral start car..put in gear..handbrake down then your off.... when parking car stop in neutral handbrake on turn off car.. put clutch down and put in gear 1st or reverse..(I used 1st) then get out..

With an auto.. I stop the car and put it all the way over to park.. I am not too familiar with autos so please tell me if I should definately be stopping in neutral and then parking after my keys are out of ignition like I just read about..
My fella has already picked me up on when I reverse in an auto and I'm not completely stopping the vehicle before I roll her into drive..is that also wrong? like I said I am not famliar with autos..and I miss my manual so much..
outback_chick is offline  
Old 02-09-2008, 09:28 AM   #25
Nostalgia
LOW AND SLOW
 
Nostalgia's Avatar
 
Join Date: Sep 2006
Location: Geelong.
Posts: 2,644
Default

P - PARK
R - REVERSE
N - NEUTRAL
D - DRIVE
2 - 2ND
1 - 1ST

What part of PARK don't some people understand ?
__________________
"Any Color You Like As Long As It's Black, Matt Black, With Flames, And A Bit Of Pinstriping".
Nostalgia is offline  
Old 02-09-2008, 03:10 PM   #26
FPV GT40
Banned
 
FPV GT40's Avatar
 
Join Date: Jun 2008
Posts: 1,054
Default

Quote:
Originally Posted by Nostalgia
P - PARK
R - REVERSE
N - NEUTRAL
D - DRIVE
2 - 2ND
1 - 1ST

What part of PARK don't some people understand ?
Pretty much sums up my opinion of this threat.....P For Park...USE IT if you are too lazy to drive a manual car, as it might save my or my families life.
FPV GT40 is offline  
Old 02-09-2008, 10:20 AM   #27
Feathers
Lucifer's Angel
 
Feathers's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 5,282
Default

In the BA I always park it in gear with the handbrake on and if it's on a hill, the front wheels turned into the kerb.

In my old auto XD it was always in park with the handbrake on.
__________________
SINISTER BA XR6
Blueprint, manual, 4490's, Redback 2.5" dual exhaust, BA Typhoon rims, tint, fog light covers, BF tailights, blue illuminated window switches, Ghia bootlid carpet, lower grille, FPV door spears, steering wheel & interior bits, XR6T + F6 intake, K&N filter, Typhoon spoiler, tuned, sway bars, custom angel eyes & plates..YUM!

If there's one thing guys in Holdens hate more than being beaten by a Ford...
It's being beaten by a girl driving a Ford
Feathers is offline  
Old 02-09-2008, 08:17 PM   #28
GT0132
FF.Com.Au Hardcore
 
GT0132's Avatar
 
Join Date: Apr 2007
Location: Miranda, NSW
Posts: 6,771
Default

I always stick her in 1st (manual) whether or not its on the flat....Just a habit and good policy in case forget to apply the hand brake, not that the hand brake on the BA's are any good
__________________
2005 BA MK2 FPV GT - 6 SPEED MANUAL , SILHOUETTE, SWISSVAX, SUNROOF, BILSTEIN AND LOVELLS, FACTORY GENUINE 19'S, X-FORCE STAINLESS QUAD CATBACK, ADVANCE HEADERS, 200 CPSI CATS, BLUEPOWER CAI, HERROD BREATHER KIT, 4:11 DIFF RATIO, MAL WOOD OPT 3+ CLUTCH, BILLET SHIFTER, MELLINGS 10227, NOW WITH REVERSE CAMERA/SENSORS, ALPINE SPEAKERS & SUB - CUSTOM TUNED TO 275 RWKW


NOW WITH A NEW ADDITION - 2017 MUSTANG V8 GT FASTBACK - , 6 SPEED AUTO IN PLATINUM WHITE,
GT0132 is offline  
Old 02-09-2008, 08:25 PM   #29
FPV GT40
Banned
 
FPV GT40's Avatar
 
Join Date: Jun 2008
Posts: 1,054
Default

Quote:
Originally Posted by ozmale42
I always stick her in 1st (manual) whether or not its on the flat....Just a habit and good policy in case forget to apply the hand brake, not that the hand brake on the BA's are any good
Not sure what is wrong with your BA hand brake, but they are about the best hand brakes Ford ever designed...probably just needs adjusting.
FPV GT40 is offline  
Old 02-09-2008, 08:29 PM   #30
GT0132
FF.Com.Au Hardcore
 
GT0132's Avatar
 
Join Date: Apr 2007
Location: Miranda, NSW
Posts: 6,771
Default

Quote:
Originally Posted by FPV GT40
Not sure what is wrong with your BA hand brake, but they are about the best hand brakes Ford ever designed...probably just needs adjusting.

That was tongue n cheek...the handbrake in the GT I've had no problems with so far ....However my previous BA (Mk1) was back to Ford no less than 4 times to get sorted....handbrake problems on BA's are more common than driveline clunk problems in BOSS manuals
__________________
2005 BA MK2 FPV GT - 6 SPEED MANUAL , SILHOUETTE, SWISSVAX, SUNROOF, BILSTEIN AND LOVELLS, FACTORY GENUINE 19'S, X-FORCE STAINLESS QUAD CATBACK, ADVANCE HEADERS, 200 CPSI CATS, BLUEPOWER CAI, HERROD BREATHER KIT, 4:11 DIFF RATIO, MAL WOOD OPT 3+ CLUTCH, BILLET SHIFTER, MELLINGS 10227, NOW WITH REVERSE CAMERA/SENSORS, ALPINE SPEAKERS & SUB - CUSTOM TUNED TO 275 RWKW


NOW WITH A NEW ADDITION - 2017 MUSTANG V8 GT FASTBACK - , 6 SPEED AUTO IN PLATINUM WHITE,
GT0132 is offline  
Closed Thread

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL